TONKAWA, OK —
OSHA Inspection: ASBURY MACHINE CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ASBURY MACHINE CORP. in 1995 NORTH PUBLIC ROAD, TONKAWA, OK 74653 (NAICS 333132). OSHA activity number 346680085.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ASBURY MACHINE CORP.
- Site address
- 1995 NORTH PUBLIC ROAD
- City
- TONKAWA
- State
- OK
- ZIP
- 74653
- Mailing
- 1995 NORTH PUBLIC ROAD, TONKAWA, OK 74653
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333132
- Employees
- 20
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.147 C01
- Issued
- Oct 25, 2023
- Abate by
- Dec 13, 2023
- Penalty
- Initial $3,572 · Current $2,143 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment was not isolated from the energy source and rendered inoperative. On or about May 2, 2023 and at times prior thereto, employees performed maintenance on machines and the employer did not have an established energy isolation program to control the unexpected energization, startup, or release of stored energy. This exposed the employees to caught-in hazards.
Recent events (2)
- — I (S) $2143.2
- — Z (S) $3572
1910.147 C04 I
- Issued
- Oct 25, 2023
- Abate by
- Dec 13, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. On or about May 2, 2023 and at times prior thereto, the employer did not develop energy isolation procedures for machines. This exposed employees to caught-in hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Oct 25, 2023
- Abate by
- Dec 13, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. On or about May 2, 2023 and at times prior thereto, employees performed maintenance on machines and were not provided energy isolation training. This exposed the employees to caught-in hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q01
- Issued
- Oct 25, 2023
- Penalty
- Initial $3,572 · Current $2,143 Reduced
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel. On or about May 2, 2023, employees were in use of a powered industrial truck and the batteries were covered with corrosion. This exposed employees to chemical hazards.
Recent events (2)
- — I (S) $2143.2
- — Z (S) $3572
1910.215 A02
- Issued
- Oct 25, 2023
- Penalty
- Initial $5,358 · Current $3,215 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections. On or about May 2, 2023 and at times prior thereto, employees were in use of grinders and the safety guards were not installed. This exposed the employees to struck-by hazards. Instance a: Baldor Grinder 10276. Instance b: Queen City Grinder Model Number: 4F.
Recent events (2)
- — I (S) $3214.8
- — Z (S) $5358
1910.215 A04
- Issued
- Oct 25, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work. On or about May 2, 2023 and at times prior thereto, employees were in use of a Baldor grinder and the work rest was not installed. This exposed the employees to a struck-by hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Oct 25, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch. On or about May 2, 2023 and at times prior thereto, employees were in use of a Baldor grinder and the tongue guard was not installed. This exposed the employees to a struck-by hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 G02
- Issued
- Oct 25, 2023
- Abate by
- Nov 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(g)(2): Facilities were not provided for flushing and neutralizing spilled electrolyte, for fire protection, for protecting charging apparatus from damage by trucks, and/or for adequate ventilation for dispersal of fumes from gassing battery. On or about May 2, 2023 and at times prior thereto, the employer did not protect the charging apparatus from damage. This exposed employees to electrical hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 333132)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346680085.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.