JERSEY CITY, NJ —
OSHA Inspection: NORTH AMERICAN WALL CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of NORTH AMERICAN WALL CORPORATION in 532 SUMMIT AVE., JERSEY CITY, NJ 07306 (NAICS 236116). OSHA activity number 346682339.
Watch North American Wall Corporation — free
Get an email when a new federal OSHA severe-injury report for North American Wall Corporation is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- NORTH AMERICAN WALL CORPORATION
- Site address
- 532 SUMMIT AVE.
- City
- JERSEY CITY
- State
- NJ
- ZIP
- 07306
- Mailing
- 4045 SPENCER STREET SUITE B24, LAS VEGAS, NV 89119
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236116
- Employees
- 30
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.1416 D03 I
- Issued
- Abate by
- Penalty
- Initial $10938.00 · Current $2814.00 Reduced
General-duty citation text
29 CFR 1926.1416(d)(3)(i): The crane was not equipped with a functioning anti-two block device: Location: 549 Summit Ave., Jersey City, NJ, 2nd Floor a. The employer failed to ensure that the crane anti-two block device was functioning before employees utilized the crane to lift loads. Employees lifting a fa�ade curtain wall for a residential building, operated a JMG crane, model MC25S, for tandem load lifting, without a functioning anti-two block device. Violation occurred on and about May 4, 2023
Recent events (3)
- — F (S) $2814
- — C (S) $10938
- — Z (S) $10938
1926.1441 D02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.1441(d)(2): The employer did not ensure that equipment covered by this section manufactured more than one year after November 8, 2010, have either an anti-two block device that meets the requirements of �� 1926.1416(d)(3), or is designed so that, in the event of a two-block situation, no damage or load failure will occur: Location: 549 Summit Ave., Jersey City, NJ, 2nd Floor a. The employer failed to ensure that the anti-two block device was functioning before employees utilized the crane to lift loads. Employees lifting a fa�ade curtain wall for a residential building, operated a Spyder, Model URW095CP10, crane for tandem load lifting without a functioning anti-two block device. Violation occurred on and about May 4, 2023
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1926.1417 C01
- Issued
- Abate by
- Penalty
- Initial $10938.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1926.1417(c)(1): The procedures applicable to the operation of the equipment, including rated capacities (load charts), recommended operating speeds, special hazard warnings, instructions, and operator's manual, were not readily available in the cab at all times for use by the operator: Location: 549 Summit Ave., Jersey City, NJ, 2nd Floor a. The employer authorized employees to use and operate a JMG, Model MC25S, crane for tandem lifts of fa�ade panels, without the manufacturer operator's manual being readily available with/on the equipment for use by the operator. Violation occurred on or about May 4, 2023
Recent events (3)
- — F (S) $0
- — C (S) $10938
- — Z (S) $10938
1926.1417 O03
- Issued
- Abate by
- Penalty
- Initial $10938.00 · Current $15000.00
General-duty citation text
29 CFR 1926.1417(o)(3): The employer failed to makes sure the operator verified that the load is within the rated capacity of the equipment by at least one of the methods outlined in 1926.1417(o)(3)(i)-(ii): Location: 549 Summit Ave., Jersey City, NJ, 2nd Floor a. The employer authorized employees to perform a tandem lift crane operation and did not provide the verified weight of the load to the crane operators. The employees engaged in tandem lift crane operations to hoist fa�ade wall panels to the second floor of the building under construction without verified load weights. Violation was observed on or about May 4, 2023
Recent events (3)
- — F (S) $15000
- — C (S) $10938
- — Z (S) $10938
1926.1417 Q
- Issued
- Abate by
- Penalty
- Initial $10938.00 · Current $15000.00
General-duty citation text
29 CFR 1926.1417(q): The equipment must not drag or pull loads sideways: Location: 549 Summit Ave., Jersey City, NJ, 2nd Floor a. The employer authorized employees to use cranes to drag and pull a fa�ade wall section laterally into position prior to installation. Employees used a Spyder, Model URW095CP10, and a JMG , Model MC25S, crane to drag and pull the wall panel section from a flat offset horizontal position to a vertical standing position for installation. Violation was observed on or about May 4, 2023
Recent events (3)
- — F (S) $15000
- — C (S) $10938
- — Z (S) $10938
1926.1427 A
- Issued
- Abate by
- Penalty
- Initial $10938.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1926.1427(a): The employer did not ensure that each operator was trained, certified/ licensed, and evaluated in accordance with this section before operating any equipment covered under subpart CC, except for the equipment listed in 1926.1427 (a)(2): 549 Summit Ave., Jersey City, NJ, 2nd Floor a. The employer allowed employees to operate a crane without being trained, certified, and evaluated. Employees operated a JMG, Model MC25S, crane for lifting fa�ade curtain walls for a residential building and were not provided certification and evaluation. Violation occurred on or about May 4, 2023
Recent events (3)
- — F (S) $0
- — C (S) $10938
- — Z (S) $10938
1926.1441 E
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.1441(e): The employer did not train each operator, prior to operating the equipment, on the safe operation of the type of equipment the operator will be using: Location: 549 Summit Ave., Jersey City, NJ, 2nd Floor a. The employer authorized employees to operate a Spyder, Model URW095CP10, crane to lift fa�ade curtain walls for a residential building under construction and did not provide operator training. Violation occurred on or about May 4, 2023
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 236116)
JAMAICA PLAIN, MA—2026-07-15 00:00:00
PERFORMANCE BUILDING COMPANY INC.
DELAVAN, WI—2026-07-15 00:00:00
TERONOMY BUILDERS, INC.
QUINCY, MA—2026-07-15 00:00:00
UNITEDWOR VM CONTRACTOR CORP
HONOLULU, HI—2026-07-15 00:00:00
CS BUILDER LLC
NEWTON, MA—2026-07-14 00:00:00
DELLBROOK CONSTRUCTION, LLC
More inspections in NJ
EAST ORANGE, NJ—2026-07-17 00:00:00
EAST ORANGE COMMUNITY CHARTER SCHOOL
EAST ORANGE, NJ—2026-07-17 00:00:00
EAST ORANGE COMMUNITY CHARTER SCHOOL
EAST ORANGE, NJ—2026-07-17 00:00:00
EAST ORANGE COMMUNITY CHARTER SCHOOL
MOUNTAIN LAKES, NJ—2026-07-17 00:00:00
JOHN CARUSO BUILDERS LLC
PENNINGTON, NJ—2026-07-16 00:00:00
BOROUGH OF PENNINGTON DEPARTMENT OF PUBLIC WORKS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346682339.