BAY SHORE, NY —
OSHA Inspection: JERRY CARDULLO IRON WORKS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of JERRY CARDULLO IRON WORKS, INC. in 101 SPENCE ST., BAY SHORE, NY 11706 (NAICS 331221). OSHA activity number 346684210.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JERRY CARDULLO IRON WORKS, INC.
- Site address
- 101 SPENCE ST.
- City
- BAY SHORE
- State
- NY
- ZIP
- 11706
- Mailing
- 101 SPENCE ST, BAY SHORE, NY 11706
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331221
- Employees
- 30
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.219 D01
- Issued
- Oct 27, 2023
- Abate by
- Nov 8, 2023
- Penalty
- Initial $8,595 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) In the metal working shop - Employees operate the Rogers Manufacturing (serial number R-10-671) shear/punch machine. The pulley was not fully guarded and was located between 15 and 30 inches from the ground. On or about May 5, 2023. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — R (S) $0
- — C (S) $8595
- — Z (S) $8595
1910.134 E01
- Issued
- Oct 27, 2023
- Abate by
- Nov 16, 2023
- Penalty
- Initial $5,156 · Current $0 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) At the worksite - Employees are required to wear half mask respirator without being fit tested prior to the initial use of the respirator, on or about May 5, 2023. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. Note: The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.
Recent events (3)
- — R (S) $0
- — C (S) $5156
- — Z (S) $5156
1910.134 K03
- Issued
- Oct 27, 2023
- Abate by
- Nov 16, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: (a) At the worksite - Employees are required to wear a half mask respirator without being trained prior to the initial use of the respirator, on or about May 5, 2023. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. Note: The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.
Recent events (3)
- — R (O) $0
- — C (S) $0
- — Z (S) $0
1910.219 E03 I
- Issued
- Oct 27, 2023
- Abate by
- Nov 8, 2023
- Penalty
- Initial $0 · Current $4,376
General-duty citation text
29 CFR 1910.219(e)(3)(i):Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): (a)In the metal working shop - Employees operate the Rogers Manufacturing (serial number R-10-671) shear/punch machine. The belt was not fully guarded; On or about May 5, 2023. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (3)
- — R (O) $4376
- — C (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Oct 27, 2023
- Abate by
- Nov 16, 2023
- Penalty
- Initial $0 · Current $2,500
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: (a) At the worksite - Employees are required to wear a half mask respirator without being fit tested prior to the initial use of the respirator, on or about May 5, 2023. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. Note: The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.
Recent events (3)
- — F (O) $2500
- — C (S) $0
- — Z (S) $0
More inspections at Jerry Cardullo Iron Works, INC.
View Jerry Cardullo Iron Works, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331221)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346684210.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.