WILMINGTON, DE —
OSHA Inspection: IMMIX FIRE PROTECTION, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of IMMIX FIRE PROTECTION, LLC in 400 MILL ROAD, WILMINGTON, DE 19806 (NAICS 922160). OSHA activity number 346686546.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IMMIX FIRE PROTECTION, LLC
- Site address
- 400 MILL ROAD
- City
- WILMINGTON
- State
- DE
- ZIP
- 19806
- Mailing
- 74 ALBE DRIVE, NEWARK, DE 19702
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 922160
- Employees
- 3
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.501 B14
- Issued
- Aug 15, 2023
- Abate by
- Sep 11, 2023
- Penalty
- Initial $6,250 · Current $6,250
General-duty citation text
29 CFR 1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached), where the outside bottom edge of the wall opening was 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 M) above the walking/working surface, was not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system. a) 400 Mill Road Wilmington, DE 19806 (Third floor): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure wood framed guardrail systems were properly installed with a top edge height of the top rail 42 inches plus or minus 3 inches. b) 400 Mill Road Wilmington, DE 19806 (fourth floor): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure wood framed guardrail systems were properly installed with a top edge height of the top rail 42 inches plus or minus 3 inches. c) 400 Mill Road Wilmington, DE 19806 (Stairwells): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure a top rail were properly installed with a top edge height of the top rail 42 inches plus or minus 3 inches. d) 400 Mill Road Wilmington, DE 19806 (elevator shaft next to staircase 004): On or about May 1, 2023, and days prior, employees were exposed to fall hazards when the employer failed to ensure a top rail were properly installed with a top edge height of top rail 42 inches plus or minus 3 inches.
Recent events (1)
- — Z (S) $6250
1926.502 B02
- Issued
- Aug 15, 2023
- Abate by
- Sep 11, 2023
- Penalty
- Initial $6,250 · Current $6,250
General-duty citation text
29 CFR 1926.502(b)(2): Midrails, screens, mesh, intermediate vertical members, or equivalent intermediate structure members were not installed between the top edge of the guardrail system and the walking/working surface when there was no wall or parapet wall at least 21 inches (53 cm) high. a) 400 Mill Road Wilmington, DE 19806 (Third floor): On or about May 1, 2023, and days prior, multiple trades were exposed to fall hazards when the employer failed to ensure wood framed guardrail systems were properly installed with a mid-rail, screen, mash, or intermediate vertical member edge height of 21 inches. b) 400 Mill Road Wilmington, DE 19806 (Fourth floor): On or about May 1, 2023, and days prior, multiple trades were exposed to fall hazards when the employer failed to ensure wood framed guardrail systems were properly installed with a mid-rail, screen, mash, or intermediate vertical member edge height of 21 inches.
Recent events (1)
- — Z (S) $6250
1926.503 A01
- Issued
- Aug 15, 2023
- Abate by
- Sep 11, 2023
- Penalty
- Initial $5,358 · Current $5,358
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) 400 Mill Road Wilmington, DE 19806: On or about May 1, 2023, and days prior, employees were exposed to fall hazards when they were not adequately trained in proper fall protection standards, methods, and concepts which resulted in several hazardous conditions that exposed employees to fall hazards when they were performing construction activities.
Recent events (1)
- — Z (S) $5358
More inspections in this industry (NAICS 922160)
More inspections in DE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346686546.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.