TAUNTON, MA —
OSHA Inspection: WYRMWOOD, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WYRMWOOD, INC. in 144 W BRITANNIA STREET, TAUNTON, MA 02780 (NAICS 337122). OSHA activity number 346692635.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WYRMWOOD, INC.
- Site address
- 144 W BRITANNIA STREET
- City
- TAUNTON
- State
- MA
- ZIP
- 02780
- Mailing
- 144 W BRITANNIA STREET, TAUNTON, MA 02780
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337122
- Employees
- 100
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 9, 2023
- Abate by
- Nov 3, 2023
- Penalty
- Initial $14,063 · Current $7,032 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: Location: Milling Area On or about May 10, 2023, a Cantek Finger Jointer was not guarded in the rear exposing employees to crush, laceration, and amputation injuries. Location: CNC Area On about May 10, 2023, employees were exposed to crush injuries, lacerations and amputations while working with Anderson Group Single Table two (2) spindle Exact Plus 1616/TC2 CNC Machine with the recirculating roller bearings in the rectangular boxway guide-way's lower right side not guarded, an Anderson Group Double Spindle Double Table CNC Machine's unguarded moving track containing hoses and wiring that ran horizontally across the top rear of the machine, and a GSI Hsiang vertical CNC Machine with an unguarded router blade on right side. Milling Area On or about May 10, 2023, a Cameron Taylor Clamp Carrier-two employee operated by a Joystick and one-hand trip mechanism used as guarding exposes employees to lacerations and amputation injuries while working within the danger zone. On or about May 10, 2023, a Grizzly Industry's Extreme Series G1033X 20" planer had no guard on the blade exposing employees to lacerations and amputation injuries. Accessory/Prophecy Area On or about May 10, 2023, two Grizzly Industry's G0564 Belt Sanders right side area's rollers not guarded exposing employees to laceration and amputation injuries.
Recent events (2)
- — I (S) $7031.5
- — Z (S) $14063
1910.213 A09
- Issued
- Aug 9, 2023
- Penalty
- Initial $6,026 · Current $3,013 Reduced
General-duty citation text
29 CFR 1910.213(a)(9): All belts, pulleys, gears, shafts, and moving parts shall be guarded in accordance with the specific requirements of 1910.219. (A) All belts, pulleys, gears, shafts, and moving parts were not guarded as required. Location: Milling Area On or about May 10, 2023, an Ironwood single foot pedal operated upcut saw had no guard to prevent employees from reaching into saw blade's area exposing employees to lacerations and amputation injuries.
Recent events (2)
- — I (S) $3013
- — Z (S) $6026
1910.213 N01
- Issued
- Aug 9, 2023
- Abate by
- Sep 28, 2023
- Penalty
- Initial $14,063 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(n)(1):Metal guard(s) covering the cutting head(s), and saw(s) if used, were not provided on: Location: Milling Area On or abut May 10, 2023, a Grizzly Industry's Extreme Series G1033X 20" planer was not covered by a metal guard exposing employees to lacerations and amputations.
Recent events (2)
- — I (S) $0
- — Z (S) $14063
1910.219 F03
- Issued
- Aug 9, 2023
- Penalty
- Initial $6,026 · Current $3,013 Reduced
General-duty citation text
29 CFR 1910.219(f)(3):Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: Location: Back Lumber Yard On or about May 10, 2023, a Dust Technology Hopper with filter 's rear chain drive's guard did not full cover the drive chain exposing employees to lacerations and amputations.
Recent events (2)
- — I (S) $3013
- — Z (S) $6026
1910.212 B
- Issued
- Aug 9, 2023
- Abate by
- Nov 3, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b):Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: Location: Accessory/Prophecy Area On or about May 10, 2023, three Nova Viking table drill presses were not bolted to the table exposing employees to bruises, lacerations and fractured bones.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Wyrmwood, INC.
View Wyrmwood, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337122)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346692635.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.