PANAMA CITY, FL —
OSHA Inspection: MARITECH MACHINE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MARITECH MACHINE, INC. in 1740 SHERMAN AVE., PANAMA CITY, FL 32405 (NAICS 332710). OSHA activity number 346694706.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARITECH MACHINE, INC.
- Site address
- 1740 SHERMAN AVE.
- City
- PANAMA CITY
- State
- FL
- ZIP
- 32405
- Mailing
- 1740 SHERMAN AVE., PANAMA CITY, FL 32405
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 23
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jul 21, 2023
- Penalty
- Initial $4,465 · Current $3,125 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) At 1740 Sherman Ave, Panama City, FL; On or about May 10, 2023 and at times prior thereto, the employer had not ensured that specific energy control procedures were developed, documented for machines including but not limited to CNC Kai Serial: 113801 and FEMCO HL-55 S lathe 03 which contained electrical, hydraulic, and pneumatic energy sources, exposing employees to electrical shock, amputation, caught-in, and struck by hazards.
Recent events (2)
- — I (S) $3125
- — Z (S) $4465
1910.253 B04 I
- Issued
- Jul 21, 2023
- Abate by
- Aug 16, 2023
- Penalty
- Initial $3,572 · Current $2,500 Reduced
1650X100
General-duty citation text
29 CFR 1910.253(b)(4)(i): Oxygen cylinders shall not be stored near highly combustible material, especially oil and grease; or near reserve stocks of carbide and acetylene or other fuel-gas cylinders, or near any other substance likely to cause or accelerate fire; or in an acetylene generator compartment. a) At 1740 Sherman Ave, Panama City, FL; On or about May 10, 2023 and at times prior thereto, the employer exposed employees to fire and explosion hazards in that oxygen cylinders were stored with combustible fuels such as Methyl Acetate, Hexane.
Recent events (2)
- — I (S) $2500
- — Z (S) $3572
1910.1200 E01
- Issued
- Jul 21, 2023
- Abate by
- Aug 16, 2023
- Penalty
- Initial $2,678 · Current $1,875 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) At 1740 Sherman Ave, Panama City, FL; On or about May 10, 2023 and at times prior thereto, the employer exposed employees to hazardous chemicals and substances that included but are not limited to Oil and Coolant without developing a workplace written hazard communication program.
Recent events (2)
- — I (S) $1875
- — Z (S) $2678
1910.215 A04
- Issued
- Jul 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4):Grinding machinery was not used with work rest(s) to support offhand grinding work: At 1740 Sherman Ave, Panama City, FL; On or about May 10, 2023 and at times prior thereto, the employer allowed employees to operate bench grinders without a work rest exposing employees to stuck-by and caught in hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.215 B09
- Issued
- Jul 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9):Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: At 1740 Sherman Ave, Panama City, FL; On or about May 10, 2023 and at times prior thereto, the employer allowed employees to operate bench grinders without a tongue guard exposing employees to stuck-by and caught in hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Maritech Machine, INC.
View Maritech Machine, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346694706.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.