Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: M&E FRAMING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of M&E FRAMING, INC. in NE QUADRANT OF S. WEBER RD. & GASKIN DR., ROMEOVILLE, IL 60446 (NAICS 238160). OSHA activity number 346697485.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch M&E Framing, INC. — free Get an email when a new federal OSHA severe-injury report for M&E Framing, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
M&E FRAMING, INC.
Site address
NE QUADRANT OF S. WEBER RD. & GASKIN DR.
City
ROMEOVILLE
State
IL
ZIP
60446
Mailing
336 NEW HOPE CHURCH RD., ALMA, GA 31510
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238160
Employees
7
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 5 exposed
Issued
Oct 13, 2023
Abate by
Nov 17, 2023
Penalty
Initial $501 · Current $501
29 CFR  1903.19(c)(1):Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.  a.  On or about May 9, 2023,  the employer did not certify to OSHA within 10 days after the abatement date that each of the following cited violations issued had been corrected:  Citation Number                                                Item Number                                    Abatement Date 01001b08/16/2023
Recent events (1)
  • — Z (O) $501

1926.453 B02 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 12, 2023
Penalty
Initial $3,572 · Current $3,572
29 CFR  1926.453(b)(2)(iv): Employee(s) working in an aerial lift were not standing firmly on the floor of the basket:  a.  On or about May 9, 2023, at the above addressed jobsite, an employee performing metal roofing installation operations from a JLG 400S aerial lift, more than twenty-five (25) feet above ground, was standing on the midrails of the basket, thereby exposing the employee to fall hazards.
Recent events (1)
  • — Z (S) $3572

1926.501 B10

Serious Gravity 10 1 instance 3 exposed
Issued
Jul 12, 2023
Penalty
Initial $6,250 · Current $6,250
29 CFR  1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  a.  On or about May 9, 2023, at the above addressed jobsite, employees performing metal roofing installation operations, approximately thirty-nine (39) feet six (6) inches above ground, were not protected from falls, thereby exposing the employees to fall hazards.
Recent events (1)
  • — Z (S) $6250

1926.503 A01

Serious Gravity 5 1 instance 5 exposed
Issued
Jul 12, 2023
Abate by
Aug 16, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a.  On or about May 9, 2023, at the above addressed jobsite, employees performing metal roofing installation operations were not provided with training on how to recognize and minimize fall hazards, thereby exposing the employees to fall hazards.
Recent events (1)
  • — Z (S) $0

View M&E Framing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346697485.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.