HOUSTON, TX —
OSHA Inspection: ALL-RITE SHEET METAL, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of ALL-RITE SHEET METAL, INC. in 5718 BROOM STREET, HOUSTON, TX 77091 (NAICS 332322). OSHA activity number 346698616.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALL-RITE SHEET METAL, INC.
- Site address
- 5718 BROOM STREET
- City
- HOUSTON
- State
- TX
- ZIP
- 77091
- Mailing
- 5718 BROOM STREET, HOUSTON, TX 77091
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 14
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.134 E01
- Issued
- Jun 26, 2023
- Abate by
- Jul 21, 2023
- Penalty
- Initial $3,572 · Current $2,143 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: On or about May 11, 2023, employees were exposed to�respiratory hazards�while soldering and wearing�a 3M filtering face piece respirator�without having been medically evaluated.
Recent events (2)
- — I (S) $2143.2
- — Z (S) $3572
1910.134 F02
- Issued
- Jun 26, 2023
- Abate by
- Jul 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: On or about May 11, 2023, employees were exposed to�respiratory hazards�while soldering and wearing�a 3M filtering face piece respirator�without having been fit tested.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- Jun 26, 2023
- Abate by
- Jul 21, 2023
- Penalty
- Initial $4,465 · Current $2,679 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On�or about�May 9, 2023, employees�were exposed�to struck-by hazards while changing the dies on a press brake without energy control procedures being utilized.
Recent events (2)
- — I (S) $2679
- — Z (S) $4465
1910.212 A01
- Issued
- Jun 26, 2023
- Abate by
- Jul 21, 2023
- Penalty
- Initial $4,465 · Current $2,679 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about May 10, 2023, employees were exposed to caught-in or between hazards while using a shearing machine without a guard to protect employees from the hold-downs.
Recent events (2)
- — I (S) $2679
- — Z (S) $4465
1910.212 A03 II
- Issued
- Jun 26, 2023
- Abate by
- Aug 31, 2023
- Penalty
- Initial $4,465 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. On or about May 11, 2023, an employee was exposed to caught-in or between hazards while using a sheet metal brake without a guard to protect the employee from the point of operation. b. On or about May 10, 2023, employees were exposed to caught-in or between hazards while using a Wysong press brake without a guard to protect employees from the point of operation. c. On or about May 10, 2023, employees were exposed to caught-in or between hazards while using a Wysong shear without a guard to protect employees from the point of operation.
Recent events (3)
- — P (S) $0
- — I (S) $0
- — Z (S) $4465
1904.29 B03
- Issued
- Jun 26, 2023
- Abate by
- Jul 7, 2023
- Penalty
- Initial $893 · Current $536 Reduced
General-duty citation text
29 CFR 1904.29(b)(3):Each recordable injury or illness was not entered on the OSHA 300 Log and/or an incident report (OSHA Form 301 or equivalent) within seven (7) calendar days of receiving information that a recordable injury or illness has occurred: On or about May 11, 2023, an employee was struck-by a piece of sheet metal resulting in a recordable injury without the employer recording the incident on the OSHA 300 Log within seven calendars of days of receiving information that the injury occurred.
Recent events (2)
- — I (O) $535.8
- — Z (O) $893
1910.178 L04 III
- Issued
- Jun 26, 2023
- Abate by
- Jul 21, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: On or about May 10, 2023, employees used powered industrial trucks without being reevaluated on performance at least once every three years.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at All-Rite Sheet Metal, INC.
View All-Rite Sheet Metal, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346698616.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.