2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17
Safety Incidents OSHA Severe Injury Reports · 2015–2025

OSHA Inspection: DRYLOCK TECHNOLOGIES, LTD.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DRYLOCK TECHNOLOGIES, LTD. in 3921 NORTH HASTINGS WAY, EAU CLAIRE, WI 54703 (NAICS 322291). OSHA activity number 346708670.

Watch Drylock Technologies, LTD. — free Get an email when a new federal OSHA severe-injury report for Drylock Technologies, LTD. is published. One employer, no account, unsubscribe in one click.
Site address
3921 NORTH HASTINGS WAY
City
EAU CLAIRE
State
WI
ZIP
54703
Mailing
3921 NORTH HASTINGS WAY, EAU CLAIRE, WI 54703
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
322291
Employees
180
Ownership type
A

6 citations on file for this inspection.

1910.157 C01

Serious Gravity 1 1 instance 3 exposed
Issued
Penalty
Initial $5692.00 · Current $3984.00 Reduced
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located, and identified so that they were readily accessible without subjecting the employees to injuries:  (a) Offsite warehouse (Bldg. 4) - northcentral section of facility; A fire extinguisher was not identified and made readily accessible by way of being blocked by a refuse container and having an electrical extension cord wrapped around its handle and nozzle.
Recent events (2)
  • — I (S) $3984.4
  • — Z (S) $5692

1910.178 L04 II B

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $5692.00 · Current $3984.00 Reduced
29 CFR 1910.178(l)(4)(ii)(B): Refresher training and evaluation was not provided to the operator when the operator was involved in an accident or near-miss incident.  (a) Offsite warehouse (Bldg. 4) - southeastern section of facility; Following an incident where an employee struck a steel beam and water line with a forklift, resulting in flooding in that section of the facility, the employee was not retrained and was permitted to continue operating forklifts.
Recent events (2)
  • — I (S) $3984.4
  • — Z (S) $5692

1910.178 M05 I

Serious Gravity 1 3 instances 6 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(m)(5)(i): When a powered industrial truck is left unattended, load engaging means were not fully lowered, controls were not neutralized, power was not shut off, and brakes set:  (a) Offsite warehouse (Bldg. 4) - northcentral section of facility; A Linde (Model No: E25C / Serial N: A11347Y00020/2021) electric forklift was discovered to be running while unattended.  (b) Offsite warehouse (Bldg. 4) - throughout the facility; Load engaging means (fork tines) are not being fully lowered when forklifts are left unattended.  (c) Primary warehouse - throughout the facility; Load engaging means (fork tines) are not being fully lowered when forklifts are left unattended.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 N04

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(n)(4): Industrial truck driver(s) were not required to slow down and sound the horn at cross aisles and wherever vision was obstructed:  (a) Primary facility - south side of warehouse; Forklift operators were not utilizing horns on a regular basis to announce their presence when traversing throughout the warehouse.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 Q07

Serious Gravity 1 1 instance 3 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.178(q)(7): Powered industrial truck(s) which were used on a round-the-clock basis were not examined for defects after each shift:  (a) Primary facility - south side of warehouse; Forklifts were not inspected and checked for defects before being utilized on each shift.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.36 G02

Other-than-serious 1 instance 3 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points.  (a) Offsite warehouse (Bldg. 4) - northwest section of facility; An exit access area was not maintained at a minimum of 28 inches (71.1 cm) wide at all points.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View DRYLOCK TECHNOLOGIES, LTD.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346708670.