DOVER, PA —
OSHA Inspection: PANAGRAPHICS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PANAGRAPHICS, INC. in 4690 RAYCOM ROAD, DOVER, PA 17315 (NAICS 332312). OSHA activity number 346726987.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PANAGRAPHICS, INC.
- Site address
- 4690 RAYCOM ROAD
- City
- DOVER
- State
- PA
- ZIP
- 17315
- Mailing
- 4690 RAYCOM ROAD, DOVER, PA 17315
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 30
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Sep 26, 2023
- Penalty
- Initial $6,250 · Current $3,600 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a) 4690 Raycom Road, DOVER, PA 17315 - employees were operating a Wysong shear, model 1452, serial number P36-530 that did not have an installed guard to prevent the operator from having any part of his body in the danger zone during the operating cycle, on or about June 14, 2023. b) 4690 Raycom Road, DOVER, PA 17315 - employees were operating an AEM sander, model bb730, motor cat. number M3A51-884, that did not have an installed guard to prevent the operator from having any part of his body in the danger zone during the operating cycle, on or about June 14, 2023. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $3600
- — Z (S) $6250
1910.147 C04 I
- Issued
- Sep 26, 2023
- Abate by
- Oct 19, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) 4690 Raycom Road, DOVER, PA 17315 - Employees were exposed to uncontrolled, potentially hazardous energy due to the employer's sole reliance on machine operation manuals for hazardous energy control on or about June 14, 2023. Abatement certification required within 15 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C06 I B
- Issued
- Sep 26, 2023
- Abate by
- Oct 19, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i)(B):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. a) 4690 Raycom Road, DOVER, PA 17315 - Employees where exposed to hazardous energy due to the employer conduct a periodic inspection of the energy control procedure at least annually on or about June 14, 2023. Abatement certification required within 15 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C07 I
- Issued
- Sep 26, 2023
- Abate by
- Oct 19, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees. a) 4690 Raycom Road, DOVER, PA 17315 - Employees were exposed to hazardous energy due to the employer not proving training for the authorized employees on or about June 14, 2023. b) 4690 Raycom Road, DOVER, PA 17315 - Employees were exposed to hazardous energy due to the employer not proving training for the affected employees on or about June 14, 2023. Abatement certification required within 15 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Panagraphics, INC.
View Panagraphics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346726987.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.