Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NAVAJOLAND HOTEL OF TUBA CITY (MAINTENANCE SHOP)

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of NAVAJOLAND HOTEL OF TUBA CITY (MAINTENANCE SHOP) in 10 N. MAIN STREET, TUBA CITY, AZ 86045 (NAICS 721110). OSHA activity number 346737216.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Navajoland Hotel of Tuba City (Maintenance Shop) — free Get an email when a new federal OSHA severe-injury report for Navajoland Hotel of Tuba City (Maintenance Shop) is published. One employer, no account, unsubscribe in one click.
Site address
10 N. MAIN STREET
City
TUBA CITY
State
AZ
ZIP
86045
Mailing
P.O. BOX 247, TUBA CITY, AZ 86045
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
721110
Employees
25
Ownership type
A

7 citations on file for this inspection.

1910.215 A02

Serious Gravity 1 1 instance 5 exposed
Issued
Aug 16, 2023
Abate by
Aug 22, 2023
Penalty
Initial $3,984 · Current $2,800 Reduced
29 CFR  1910.215(a)(2):Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections:  Maintenance Shop - A Delta floor mounted grinder was not guarded on the spindle end.    Employees are exposed to caught in and laceration hazards.
Recent events (2)
  • — I (S) $2800
  • — Z (S) $3984

1910.215 A04

Serious Gravity 1 1 instance 5 exposed
Issued
Aug 16, 2023
Abate by
Aug 22, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:        Maintenance Shop - A Delta floor mounted grinder had no work rest on the right side.    Employees are exposed to caught in and laceration hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.215 B09

Serious Gravity 1 1 instance 5 exposed
Issued
Aug 16, 2023
Abate by
Aug 22, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:                 Maintenance Shop - A Delta floor mounted grinder had a  measured 1/2" gap between the tongue guard and the grinding wheel.      Employees are exposed to impalement  hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Deleted Serious Gravity 1 1 instance 7 exposed
Issued
Aug 16, 2023
Abate by
Sep 11, 2023
Penalty
Initial $3,984 · Current $0 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:   Hazard Communication Program - The employer did not develop a written Hazard Communication Program for employees in the maintenance departments who when use products such as but not limited to flammable paints, thinners, welding gases, and bleach, on a daily.  Employees are exposed to skin, eye, and lung irritation hazards.  The written program shall include the following:   1. A list of all hazardous chemicals used at the work site;  1. Current Safety Data Sheets (SDS's);               2. A description of the pictogram system:             3. A description of the labeling system that will be used in the workplace;  4. A description of training and information provided to affected employees.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3984

1910.1200 G08

Deleted Serious Gravity 1 1 instance 5 exposed
Issued
Aug 16, 2023
Abate by
Sep 11, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical:  Hazard Communication Program - The employer did not maintain safety data sheets (SDS's) for each hazardous chemical product used in the maintenance department, such as but not limited to,  flammable paints, thinners, welding gases, and cleaning products.  Employees are exposed to skin and eye irritation hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 1 1 instance 20 exposed
Issued
Aug 16, 2023
Abate by
Sep 11, 2023
Penalty
Initial $0 · Current $2,000
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   Hazard Communication Program - The employer did not provide the required information and training to maintenance employees using hazardous chemical products such as but not limited to flammable paints, thinners,  welding gases,  and cleaning products. Employees are exposed to skin. eye, and lung irritation hazards.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $0

1910.253 B02 IV

Other-than-serious 1 instance 5 exposed
Issued
Aug 16, 2023
Abate by
Aug 22, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.253(b)(2)(iv): Valve protection caps, where cylinders were designed to accept caps, were not always in place, hand-tight, except when cylinders were in use or connected for use:  Maintenance Shop - Two unsecured oxygen cylinders not in use, did not have a valve caps in place.  Employees are exposed to fire hazards
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346737216.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.