OSHA Inspection: SCHMIDT AUTOMOTIVE USA LP

Issued

2023-07-18 00:00:00

Abate by

2023-07-28 00:00:00

Penalty

Initial $3572.00 · Current $2400.00 Reduced

General-duty citation text

29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a)Main Production Warehouse, BMW Line, Flying Motion System; On or about June 1st, 2023 and times prior employees were exposed to struck-by hazards in that the employer failed to ensure procedures for the control of potentially hazardous energy were utilized when employees performed maintenance activities such as, but not limited to, re-leveling of the robot on the flying motion system

Issued

2023-07-18 00:00:00

Penalty

Initial $2277.00 · Current $1600.00 Reduced

General-duty citation text

29 CFR  1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  a) Main Production Warehouse Front Area, Robodrill; On or about June 1, 2023 and times prior employees were exposed to caught-in hazards in that the employer failed to ensure an exposed pulley on the Fanuc Robodrill CNC machine was effectively guarded against employees being able to access points of operation during machine operation.

Issued

2023-07-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.219(e)(3)(i):Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):  a) Main Production Warehouse Front Area, Robodrill; On or about June 1, 2023 and times prior employees were exposed to caught-in hazards in that the employer failed to ensure an exposed pulley on the Fanuc Robodrill CNC machine was effectively guarded against employees being able to access points of operation during machine operation.

Issued

2023-07-18 00:00:00

Abate by

2023-09-08 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.132(d)(2):The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment:  a) 2471 Innovation Drive, Main Production Warehouse; On or about June 1, 2023 and times prior the employer failed to verify that the required workplace assessment had been performed through a written certification that identified the workplace evaluated, the person certifying that the evaluation had been performed, the date(s) of the hazard assessment, and which identified the document as a certification of hazard assessment.