OSHA Inspection: HENRY AGUILAR CABRERA DBA HENRY CABRERA

Issued

Oct 12, 2023

Abate by

Nov 7, 2023

Penalty

Initial $376 · Current $376

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  Henry Aguilar Cabrera DBA Henry Cabrera, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:  Citation Number                Item Number                        Abatement Date 01                                             03-a                                           08/08/2023   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jul 13, 2023

Penalty

Initial $2,679 · Current $2,000 Reduced

General-duty citation text

29 CFR 1926.100(a):  Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:  a) On May 5, 2023 Employees were not wearing protective helmets where there was a possible danger of head injury from falling objects.  No abatement certification or documentation is required for this item.

Issued

Jul 13, 2023

Penalty

Initial $4,018 · Current $0 Reduced

General-duty citation text

29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:     a) On May 5, 2023 employees were exposed to eye injury while operating a pneumatic nail gun without eye protection during roofing work.  No abatement certification or documentation is required for this item.

Issued

Jul 13, 2023

Abate by

Aug 8, 2023

Penalty

Initial $4,688 · Current $2,000 Reduced

General-duty citation text

29 CFR 1926.416(a)(1):  Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means:    a)  On or about  May 5, 2023,  employees were exposed to electrical shock while working around exposed electrical parts with a voltage of 120/240 volts.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Jul 13, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.1053(b)(12): Ladders used where the employee or the ladder could contact exposed energized electrical equipment did not have nonconductive side rails:  a) On May 5, 2023, employees were exposed to electrical shock while using a aluminum extension ladder to access and egress work area in close proximity to a 120/240 volt power line.  No abatement certification or documentation is required for this item.

Issued

Jul 13, 2023

Penalty

Initial $4,688 · Current $3,500 Reduced

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a)  On May 5, 2023, employees performing roofing work were exposed to fall hazards of up  22 feet.  No abatement certification or documentation is required for this item.