TRINITY, AL —
OSHA Inspection: CLIPPITY CLOP CONSTRUCTION, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CLIPPITY CLOP CONSTRUCTION, LLC in 4143 ALABAMA HWY 20, TRINITY, AL 35673 (NAICS 238130). OSHA activity number 346750417.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CLIPPITY CLOP CONSTRUCTION, LLC
- Site address
- 4143 ALABAMA HWY 20
- City
- TRINITY
- State
- AL
- ZIP
- 35673
- Mailing
- 357 JONESTOWN RD, SUMMERTOWN, TN 38483
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 10
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.453 B02 V
- Issued
- Oct 5, 2023
- Abate by
- Oct 25, 2023
- Penalty
- Initial $2,411 · Current $1,447 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v):A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift: a.) At the jobsite located at 4143 Alabama Hwy 20, Trinity, AL 35673 on or about 06/06/2023, the employer exposed employees to fall hazards in that employees were operating a blue and gray Genie manlift that was rented from Cotter Rentals, the only identifying numbers on the manlift were notated on the wheel axle model number: VB0758R113H1CJ-11, PN: 39330GT, CODE: 8341, without fall protection at heights of approximately 30' without fall protection.
Recent events (2)
- — I (S) $1446.6
- — Z (S) $2411
1926.501 B01
- Issued
- Oct 5, 2023
- Abate by
- Oct 23, 2023
- Penalty
- Initial $4,219 · Current $2,531 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. a.) At the jobsite located at 4143 Alabama Hwy 20, Trinity, AL 35673 on or about 06/06/2023, the employer exposed employees to fall hazards in that employees were climbing the purlins without fall protection at heights of approximately 45' without fall protection. b.)At the jobsite located at 4143 Alabama Hwy 20, Trinity, AL 35673 on or about 06/06/2023, the employer exposed employees to fall hazards in that employees were walking the ridge board without fall protection at heights of approximately 30' without fall protection.
Recent events (2)
- — I (S) $2531.4
- — Z (S) $4219
1926.602 C01 II
- Issued
- Oct 5, 2023
- Abate by
- Oct 26, 2023
- Penalty
- Initial $4,219 · Current $2,531 Reduced
General-duty citation text
29 CFR 1926.602(c)(1)(ii): Modifications or additions affecting the safe operation of the equipment were made without the manufacturer's written approval:Note: If such modifications or changes were made, the capacity, operation, and maintenance instruction plates, tags, or decals should have been changed accordingly. a.) At the jobsite located at 4143 Alabama Hwy 20, Trinity, AL 35673 on or about 06/06/2023, the employer exposed employees to fall hazards in that employees were instructed to work off of a manmade platform that was attached to a Sky Trak Model 6042 that was not approved by the manufacturer or registered professional engineer.
Recent events (2)
- — I (S) $2531.4
- — Z (S) $4219
1926.503 A01
- Issued
- Oct 5, 2023
- Abate by
- Oct 23, 2023
- Penalty
- Initial $338 · Current $203 Reduced
General-duty citation text
29 CFR 1926.503(a)(1):The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a.) At the jobsite located at 4143 Alabama Hwy 20, Trinity, AL 35673 on or about 06/06/2023, the employer did not train employees to recognize fall hazards.
Recent events (2)
- — I (O) $202.8
- — Z (O) $338
1926.602 D
- Issued
- Oct 5, 2023
- Abate by
- Oct 26, 2023
- Penalty
- Initial $338 · Current $203 Reduced
General-duty citation text
29 CFR 1926.602(d):The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l)(1)(i) and 1910.178(l)(2)(ii), AND AS REFERENCED BY THE NOTE CONTAINED IN 1926.602(d) a.) At the jobsite located at 4143 Alabama Hwy 20, Trinity, AL 35673 on or about 06/06/2023, the employer failed to train and certify forklift operators
Recent events (2)
- — I (O) $202.8
- — Z (O) $338
More inspections in this industry (NAICS 238130)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346750417.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.