SANGER, TX —
OSHA Inspection: NATIONAL FRAME RAIL, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NATIONAL FRAME RAIL, INC. in 11919 INTERSTATE 35 N, SANGER, TX 76266 (NAICS 332312). OSHA activity number 346765670.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NATIONAL FRAME RAIL, INC.
- Site address
- 11919 INTERSTATE 35 N
- City
- SANGER
- State
- TX
- ZIP
- 76266
- Mailing
- 11919 INTERSTATE 35 N, SANGER, TX 76266
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 30
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.36 D01
- Issued
- Jul 10, 2023
- Penalty
- Initial $3,984 · Current $2,390 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: On June 13, 2023, and times prior thereto, in the welding shop, an exit door was locked and prevented quick exit of the building in case of an emergency exposing employees to fire and smoke hazards.
Recent events (2)
- — I (S) $2390.4
- — Z (S) $3984
1910.37 B02
- Issued
- Jul 10, 2023
- Penalty
- Initial $3,984 · Current $2,390 Reduced
General-duty citation text
29 CFR 1910.37(b)(2):Each exit was not clearly visible and marked by a sign reading "Exit": On June 13, 2023, and times prior thereto, the employer did not ensure exit doors were equipped with "EXIT" signs above the doors in case of an emergency, exposing employees to entrapment hazards; a) At the west wall door in the press brake room, no EXIT sign was placed above the exit door, b) at the north east door in the machine shop, no EXIT sign was placed above the exit door.
Recent events (2)
- — I (S) $2390.4
- — Z (S) $3984
1910.212 A01
- Issued
- Jul 10, 2023
- Abate by
- Aug 7, 2023
- Penalty
- Initial $9,376 · Current $5,626 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On June 13, 2023, and times prior thereto, employees operated machinery without guards and were exposed to ingoing nip points, caught-in rotating parts and amputation hazards: a) in the horizontal band saw cutting area, the horizontal band saw had unused portion(s) of the blade not enclosed or guarded while cutting metal parts. b) on the north east side of the sanding machine area, the belt sanding machinery was not provided with a guard at each nip point where the sanding belt ran onto a pulley.
Recent events (2)
- — I (S) $5625.6
- — Z (S) $9376
1910.253 B02 II
- Issued
- Jul 10, 2023
- Penalty
- Initial $4,687 · Current $2,812 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders was not located away from elevators, stairs, and gangways, or where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons. On June 13, 2023, and times prior thereto, the employer did not ensure compressed air cylinders were chained or secured from falling exposing employees to potential struck-by hazards; a) In the press brake room, compressed air cylinders were left unsecured and exposed to being knocked down, b) In the welding shop area, compressed air cylinders left unsecured were exposed to being knocked down.
Recent events (2)
- — I (S) $2812.2
- — Z (S) $4687
1904.41 A02
- Issued
- Jul 10, 2023
- Abate by
- Aug 7, 2023
- Penalty
- Initial $1,562 · Current $937 Reduced
General-duty citation text
29 CFR 1904.41(a)(2): 29 CFR 1904.41(a)(2) Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form. On June 13, 2023, and times prior thereto,the employer did not electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee.
Recent events (2)
- — I (O) $937.2
- — Z (O) $1562
1910.157 C01
- Issued
- Jul 10, 2023
- Penalty
- Initial $746 · Current $448 Reduced
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries. On June 13, 2023, and times prior thereto, the employer did not ensure fire extinguishers had easy access in case of a fire, exposing employees to smoke hazards; a) Outside the front office, fire extinguisher blocked by an air-compressor, b) South side of the press brake room, fire extinguisher blocked by metal material.
Recent events (2)
- — I (O) $447.6
- — Z (O) $746
1910.303 B01
- Issued
- Jul 10, 2023
- Penalty
- Initial $877 · Current $526 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees: On June 13, 2023, and times prior thereto, south side of the maintenance area, an employee connected an extension cord with the missing ground pin to energize a Lesko floor fan, exposing employees to electrical shock hazards.
Recent events (2)
- — I (O) $526.2
- — Z (O) $877
1910.305 G02 III
- Issued
- Jul 10, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screw. On June 13, 2023, and times prior thereto, north side of the welding shop, a power cord with exposed internal wiring pulled away from terminal screws used to energize a portable grinder, exposing employees to electrical shock hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at National Frame Rail, INC.
View National Frame Rail, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346765670.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.