HINSDALE, NH —
OSHA Inspection: GREEN MOUNTAIN TAP HANDLES, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GREEN MOUNTAIN TAP HANDLES, LLC in 40 CANAL ST, HINSDALE, NH 03451 (NAICS 321918). OSHA activity number 346778210.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GREEN MOUNTAIN TAP HANDLES, LLC
- Site address
- 40 CANAL ST
- City
- HINSDALE
- State
- NH
- ZIP
- 03451
- Mailing
- 40 CANAL ST, HINSDALE, NH 03451
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 14
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 E01
- Issued
- Oct 25, 2023
- Penalty
- Initial $4,465 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace. Paint Shop - On or about June 20, 2023, medical evaluations were not provided to employees that are required by the employer to wear respirators while performing painting operations.
Recent events (2)
- — I (S) $1000
- — Z (S) $4465
1910.134 F02
- Issued
- Oct 25, 2023
- Abate by
- Nov 6, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator. Paint Shop - On or about June 20, 2023, fit testing was not performed for employees that are required by the employer to wear respirators while performing painting operations.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Oct 25, 2023
- Abate by
- Nov 6, 2023
- Penalty
- Initial $4,465 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Location: Wood Shop a) Craftsman C55DR-1760 drill press - On or about June 20, 2023, employees were not protected from rotating parts at the point of operation where a chuck and bit guard was not installed on the machine. b) Grizzly G7948 drill press - On or about June 20, 2023, employees were not protected from rotating parts at the point of operation where a chuck and bit guard was not installed on the machine.
Recent events (2)
- — I (S) $0
- — Z (S) $4465
1910.1200 H02 III
- Issued
- Oct 25, 2023
- Abate by
- Nov 6, 2023
- Penalty
- Initial $4,465 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(h)(2)(iii):The employer did not provide information to the employees as to the location and availability of the written hazard communication program, and material safety data sheets required by 29 CFR 1910.1200. Production facility - On or about June 20, 2023, the employer did not provide effective information and training to employees as to the location of the written hazard communication program or the location of safety data sheets in the workplace.
Recent events (2)
- — I (S) $0
- — Z (S) $4465
1910.242 B
- Issued
- Oct 25, 2023
- Abate by
- Nov 6, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. CNC router room - On or about June 20, 2023, the compressed air wand used for cleaning purposes in the CNC room was measured at approximately 80 p.s.i.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Green Mountain TAP Handles, LLC
View Green Mountain TAP Handles, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346778210.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.