Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RAKOVEC CONSTRUCTION LLC

Special Programs inspection · Safety discipline

On , OSHA opened a special Programs safety inspection of RAKOVEC CONSTRUCTION LLC in 316 E 1ST STREET, LOYAL, WI 54446 (NAICS 238130). OSHA activity number 346784465.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rakovec Construction LLC — free Get an email when a new federal OSHA severe-injury report for Rakovec Construction LLC is published. One employer, no account, unsubscribe in one click.
Site address
316 E 1ST STREET
City
LOYAL
State
WI
ZIP
54446
Mailing
W4768 CAPITAL ROAD, GREENWOOD, WI 54437
Inspection type
Special Programs (K)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

6 citations on file for this inspection.

1926.304 I01

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 27, 2023
Abate by
Dec 15, 2023
Penalty
Initial $3,349 · Current $2,009 Reduced
29 CFR 1926.304(i)(1): Each circular hand-fed rip saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut:   (a) On or about June 21, 2023, a DeWalt brand table saw used to rip cut materials was not equipped with a hood guard.
Recent events (2)
  • — I (S) $2009.4
  • — Z (S) $3349

1926.501 B13

Serious Gravity 5 2 instances 3 exposed
Issued
Sep 27, 2023
Abate by
Dec 15, 2023
Penalty
Initial $3,349 · Current $2,009 Reduced
29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):    (a) Roof of residential home; On or about June 21, 2023, fall protection systems were not used during roofing operations on a new residential roof at heights ranging from 8 feet, 4 inches to 18 feet, 7 inches above the ground.  (b) Roof of residential home; On or about the week of June 4-10, 2023; fall protection systems were not used during roof sheathing or preparation operations of installing roofing underlayment and drip edge on a new residential roof at heights ranging from 8 feet, 4 inches to 18 feet, 7 inches above the ground.
Recent events (2)
  • — I (S) $2009.4
  • — Z (S) $3349

1926.503 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 27, 2023
Abate by
Dec 15, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  (a) Throughout the company; Fall hazard awareness and/or fall prevention training was not provided to employees before they performed roofing activities at heights up to 18 feet, 7 inches above the lower level.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 27, 2023
Penalty
Initial $2,679 · Current $1,607 Reduced
29 CFR  1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:   (a) Southwest side of the house; On or about June 21, 2023, Side rails of a multi-position ladder setup as a self-supporting ladder (stepladder) to access an elevated work area did not extend 3 feet past the upper landing.
Recent events (2)
  • — I (S) $1607.4
  • — Z (S) $2679

1926.1053 B13

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 27, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.1053(b)(13): The top or top step of a stepladder was used as a step:   (a) Southwest side of the house; On or about June 21, 2023, the top steps of a multi-position ladder setup as a self-supporting ladder (stepladder) were used to access an elevated work area as part of roofing operations.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1060 A

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 27, 2023
Abate by
Dec 15, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would train each employee in the procedures to be followed to minimize hazards related to ladders and stairways:   (a) Throughout the company; On or about June 21, 2023, training was not provided to inform employees how to properly setup, use, and inspect ladders before they used a multi-position ladder to access elevated work areas as part of roofing operations.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346784465.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.