MONSEY, NY —
OSHA Inspection: LK USA INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LK USA INC. in 86 HIGHVIEW ROAD, MONSEY, NY 10952 (NAICS 238140). OSHA activity number 346793888.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LK USA INC.
- Site address
- 86 HIGHVIEW ROAD
- City
- MONSEY
- State
- NY
- ZIP
- 10952
- Mailing
- 21 SOUTH POST LANE, MONSEY, NY 10952
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 8
- Ownership type
- A
Citations
2 citations on file for this inspection.
1926.451 F03
- Issued
- Dec 22, 2023
- Penalty
- Initial $4,688 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity: a) 86 Highview Road, Monsey NY 10952 - West-Side of Building: On or about 6/26/23, a three-tier high tubular welded frame scaffold being used to perform masonry work was not inspected for visible defects by a competent person before each work shift as the scaffold was being supported by: 1. baseplates that bore on a stack of loose wood planks that were not secured to each other to prevent slippage and were laid loosely on top of a lower scaffold frame to bridge a hole created by a basement stairwell opening; 2. a baseplate that bore on a stack of loose wood planks that were not secured to each other to prevent slippage and which were which laid loosely across a masonry ledge in order to bridge over a hole by a hole created by a window well opening and one plank was damaged; and 3. baseplates that bore on a stacks of loose pieces of cut lumber which were not secured to each other. b) 86 Highview Road, Monsey NY 10952 - North-Side of Building: On or about 6/26/23, a five-tier high tubular welded frame scaffold being used to perform masonry work was not inspected for visible defects by a competent person before each work shift as 1. the 3rd tier was was not fully planked while masonry work was being performed on that level and 2. mid and top rails were not present on the 4th tier of the scaffold while masonry work was being performed on that level. Because abatement of this violation is already documented in the inspection file, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (3)
- — C (S) $4688
- — F (S) $0
- — Z (S) $4688
1926.451 F07
- Issued
- Dec 22, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration: a) 86 Highview Road, Monsey NY 10952 - West-Side of Building: On or about 6/26/23, a three-tier high tubular welded frame scaffold being used to perform masonry work had not been erected under the supervision and direction of a competent person qualified in scaffold erection was not inspected for visible defects by a competent person as the scaffold was being supported by: 1. baseplates that bore on a stack of loose wood planks that were not secured to each other to prevent slippage and were laid loosely on top of a lower scaffold frame to bridge a hole created by a basement stairwell opening; 2. a baseplate that bore on a stack of loose wood planks that were not secured to each other to prevent slippage and which were which laid loosely across a masonry ledge in order to bridge over a hole by a hole created by a window well opening and one plank was damaged; and 3. baseplates that bore on a stacks of loose pieces of cut lumber which were not secured to each other. b) 86 Highview Road, Monsey NY 10952 - North-Side of Building: On or about 6/26/23, a five-tier high tubular welded frame scaffold being used to perform masonry work was not inspected for visible defects by a competent person before each work shift as: 1. the 3rd tier was was not fully planked while masonry work was being performed on that level; 2. mid and top rails were not present on the 4th tier of the scaffold while masonry work was being performed on that level and 3. the 3rd tier of the scaffold was being actively dismantled while at the same time masonry work was occurring in the immediate area being dismantled. Because abatement of this violation is already documented in the inspection file, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (3)
- — C (S) $0
- — F (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346793888.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.