CHICAGO, IL —
OSHA Inspection: SUPERIOR FABRICATION INC.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of SUPERIOR FABRICATION INC. in S. COLUMBUS DRIVE AND E JACKSON DR CHICAGO, ILLINOIS 41.875782 N, 87.620815 W, CHICAGO, IL 60604 (NAICS 332999). OSHA activity number 346810971.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUPERIOR FABRICATION INC.
- Site address
- S. COLUMBUS DRIVE AND E JACKSON DR CHICAGO, ILLINOIS 41.875782 N, 87.620815 W
- City
- CHICAGO
- State
- IL
- ZIP
- 60604
- Mailing
- 377 LOWER BRUSH CREEK ROAD, LINDEN, TN 37096
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 10
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L01 I
- Issued
- Sep 28, 2023
- Abate by
- Nov 2, 2023
- Penalty
- Initial $7,813 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) On or about June 30, 2023, at the above addressed jobsite, the employer did not train and evaluate the employee operating the Xtreme XR 1255-B Telehandler Forklift Serial no. XR1255071392024.
Recent events (2)
- — I (S) $0
- — Z (S) $7813
1926.20 B01
- Issued
- Sep 28, 2023
- Abate by
- Nov 30, 2023
- Penalty
- Initial $7,813 · Current $4,250 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): The employer did not initiate and maintain such programs as may be necessary to comply with this part. a) On or about June 30, 2023, at the above addressed jobsite, the employer did not maintain programs to provide for compliance with the OSH Act to control or minimize the safety and health hazards associated with temporary fencing installation operations that his employees are required to perform.
Recent events (2)
- — I (S) $4250
- — Z (S) $7813
1926.21 B02
- Issued
- Sep 28, 2023
- Abate by
- Nov 30, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe condition(s) and the regulation(s) applicable to his work environment to control or eliminate any hazard(s) or other exposure to illness or injury a) On or about June 30, 2023, at the above addressed jobsite, employees were performing temporary fence installation operations and the employer did not instruct the employee's in the recognition, avoidance and control of hazards associated with the work environment.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.100 A
- Issued
- Sep 28, 2023
- Penalty
- Initial $7,813 · Current $4,250 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: a) On or about June 30, 2023, at the above addressed jobsite, employees performing temporary fence installation activities were not protected from overhead hazards.
Recent events (2)
- — I (S) $4250
- — Z (S) $7813
1926.251 A01
- Issued
- Sep 28, 2023
- Penalty
- Initial $6,250 · Current $4,500 Reduced
General-duty citation text
29 CFR 1926.251(a)(1): Rigging equipment for material handling was not inspected prior to each use on each shift and as necessary during its use to ensure that it is safe. Defective rigging equipment was not removed from service: a) On or about June 30, 2023, at the above addressed jobsite, the employer did not inspect the Xtreme XR 1255-B Telehandler Forklift Serial no. XR1255071392024 and its rigging equipment for defects prior to use, thereby exposing employees to hazards associated with defective rigging equipment.
Recent events (2)
- — I (S) $4500
- — Z (S) $6250
More inspections at Superior Fabrication INC.
View Superior Fabrication INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346810971.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.