Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CARLOS & WILLIAM CONSTRUCTION CORP

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CARLOS & WILLIAM CONSTRUCTION CORP in 2436 MOTOR PARKWAY, RONKONKOMA, NY 11779 (NAICS 238140). OSHA activity number 346823404.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Carlos & William Construction Corp — free Get an email when a new federal OSHA severe-injury report for Carlos & William Construction Corp is published. One employer, no account, unsubscribe in one click.
Site address
2436 MOTOR PARKWAY
City
RONKONKOMA
State
NY
ZIP
11779
Mailing
93 LEXINGTON AVE, WEST HEMPSTEAD, NY 11552
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
6
Ownership type
A

8 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 8, 2023
Abate by
Aug 14, 2023
Penalty
Initial $3,349 · Current $3,349
29 CFR  1926.100(a):Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a) On or about July 12, 2023, at 2436 Motor Parkway, Ronkonkoma NY 11779, an employee was walking below overhead stucco work without a protective helmet.  Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $3349

1926.451 E01

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 8, 2023
Abate by
Aug 14, 2023
Penalty
Initial $3,349 · Current $3,349
29 CFR  1926.451(e)(1):When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.  a) on or about July 12, 2023, at 2436 Motor Parkway, Ronkonkoma NY 11779,  employees were observed climbing up and down the frames of a fabricated frame scaffold, that  did not have an access ladder.  Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19
Recent events (1)
  • — Z (S) $3349

1926.451 G01 VII

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 8, 2023
Abate by
Aug 14, 2023
Penalty
Initial $3,349 · Current $3,349
29 CFR  1926.451(g)(1)(vii):Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.  a) on or about July 12, 2023, at 2436 Motor Parkway, Ronkonkoma NY 11779,  employees were applying stucco base, while working from a fabricated frame scaffold, approximately 11  feet above the ground level, without a means of fall protection.  Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19
Recent events (1)
  • — Z (S) $3349

1926.451 B01 II

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 8, 2023
Abate by
Aug 14, 2023
Penalty
Initial $3,349 · Current $3,349
29 CFR  1926.451(b)(1)(ii):The platform was not planked or decked as fully as possible and the remaining open space between the platform and the uprights exceeded 9.5 inches (24.1 cm):  a) on or about July 12, 2023, at 2436 Motor Parkway, Ronkonkoma NY 11779,  employees were applying stucco base while working   from fabricated frame scaffold, approximately 11 feet above the ground level. The working level only had two planks installed.  Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19
Recent events (1)
  • — Z (S) $3349

1926.452 C02

Serious Gravity 5 1 instance 3 exposed
Issued
Aug 8, 2023
Abate by
Aug 14, 2023
Penalty
Initial $3,349 · Current $3,349
29 CFR  1926.452(c)(2):Tubular welded frames and panels were not braced by cross, horizontal, or diagonal braces, or combination thereof, which would have secured vertical members together laterally:  a) on or about July 12, 2023, at 2436 Motor Parkway, Ronkonkoma NY 11779,  employees were applying stucco base, while working   from a fabricated frame scaffold, approximately 11 feet above the ground. The scaffold was missing horizontal braces.  Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19
Recent events (1)
  • — Z (S) $3349

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
Aug 8, 2023
Abate by
Aug 18, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(e)(1):Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   a) on or about July 12, 2023, at 2436 Motor Parkway, Ronkonkoma NY 11779,  an employee was observed applying Greenmaker Industries Standard   Base Coat for stucco,  a skin and respiratory irritant, to the walls of a 2 story residence , without a hazard communication program.  Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19
Recent events (1)
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 1 exposed
Issued
Aug 8, 2023
Abate by
Aug 18, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(g)(8):  The employer did not ensure that Safety Data Sheets were readily accessible during each work shift to employees when they were in their work area(s)  a) on or about July 12, 2023, at 2436 Motor Parkway, Ronkonkoma NY 11779, an employee was observed applying Greenmaker Industries Standard   Base Coat for stucco,  a skin and respiratory irritant, to the walls of a 2 story residence , without safety data sheets readily available.   Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19
Recent events (1)
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 1 exposed
Issued
Aug 8, 2023
Abate by
Aug 18, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) on or about July 12, 2023, at 2436 Motor Parkway, Ronkonkoma NY 11779,  an employee was observed applying Greenmaker Industries Standard   Base Coat for stucco,  a skin and respiratory irritant, to the walls of a 2 story residence , without a hazard communication training program.  Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19
Recent events (1)
  • — Z (O) $0

View Carlos & William Construction Corp's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346823404.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.