OSHA Inspection: E.H. BEILER INDUSTRIAL SVC. LLC

Issued

Sep 21, 2023

Penalty

Initial $4,465 · Current $4,000 Reduced

General-duty citation text

29 CFR  1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not appropriately worn by employee(s) working from an aerial lift:  a) Job site - Employees using a JLG 800S aerial lift to access and egress the roof of a building did not don a body belt or harness and were exposed to fall hazards approximately 36 feet high above grade, on or about July 27, 2023.  b) Job site - Employees using a JLG 600S aerial lift to access and egress the roof of a building did not don a body belt or harness and were exposed to fall hazards approximately 45 feet high above grade, on or about July 27, 2023.  No abatement certification or documentation required.

Issued

Sep 21, 2023

Abate by

Nov 8, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.   a) Job site - Employees used a JLG 600S aerial lift to access and egress the roof of a building and were not trained in appropriate fall protection methods to avoid hazards associated with working from an aerial lift, on or about July 27, 2023.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Issued

Sep 21, 2023

Penalty

Initial $6,250 · Current $3,500 Reduced

General-duty citation text

29 CFR  1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems:  a) Jobsite - Employees performing metal edge work near and at the edges of a metal decked roof approximately 36 feet - 42 feet high above grade were not provided fall protection, on or about July 27, 2023.  No abatement certification or documentation required.

Issued

Sep 21, 2023

Abate by

Nov 8, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1926.761(b): The employer did not train each employee exposed to a fall hazard in accordance with the requirements of 29 CFR 1926.761:   a) Jobsite - Employees performing metal edge work near and at the edges of a metal decked roof were not instructed on the use and application of fall protection, on or about July 27, 2023.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.