TULSA, OK —
OSHA Inspection: FSEB ENTERPRISE, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FSEB ENTERPRISE, LLC in 5909 EAST 13TH STREET, TULSA, OK 74112 (NAICS 332510). OSHA activity number 346871296.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FSEB ENTERPRISE, LLC
- Site address
- 5909 EAST 13TH STREET
- City
- TULSA
- State
- OK
- ZIP
- 74112
- Mailing
- 5909 EAST 13TH STREET, TULSA, OK 74112
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332510
- Employees
- 22
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Oct 13, 2023
- Abate by
- Dec 1, 2023
- Penalty
- Initial $4,465 · Current $2,679 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about July 27, 2023, and at times prior thereto, in the shop area, employees were not protected from point of operation hazards from multiple spindle screw machines, including but not limited to the following, which lacked guarding where the machine door did not have an interlock and/or the door did not fully enclose the point-of-operation: a. ACME- GRIDLEY RB-6; SERIAL# 84849-A, b. ACME-GRIDLEY RB-6; SERIAL# 84900-A, c. ACME-GRIDLEY RB-8; SERIAL# 96453-X, d. WARNER-SWASEY 6 SPINDLE; SERIAL# 2459728, e. WARNER-SWASEY 5 SPINDLE; SERIAL# 2517384, f. WARNER-SWASEY 5 SPINDLE; SERIAL# 2252088, g. WARNER-SWASEY 5 SPINDLE; SERIAL# 2371381, h. ACME-GRIDLEY RB-8; SERIAL# 96258, i. ACME-GRIDLEY RB-6; SERIAL# 71328-A, j. ACME-GRIDLEY RB-6; SERIAL# 713325-A, k. ACME-GRIDLEY RB-6; SERIAL# 71693-A, l. ACME-GRIDLEY RB-6; SERIAL# 71557-A, m. WARNER-SWASEY 5 SPINDLE; SERIAL# 2411001, n. WARNER-SWASEY 5 SPINDLE; SERIAL# 2101461, o. WARNER-SWASEY 5 SPINDLE; SERAIL# 2409471, p. WARNER-SWASEY 5 SPINDLE; SERAIL# 2055821, q. ACME-GRIDLEY RB-6; SERAIL# 84211, r. WARNER-SWASEY 6 SPINDLE; SERIAL# 1413022, and s. WARNER-SWASEY 6 SPINDLE; SERIAL# 2486634.
Recent events (2)
- — I (S) $2679
- — Z (S) $4465
1910.215 B09
- Issued
- Oct 13, 2023
- Abate by
- Oct 25, 2023
- Penalty
- Initial $2,678 · Current $1,607 Reduced
General-duty citation text
29 CFR 1910.215(b)(9):The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about July 28, 2023, and at times prior thereto, in the shop area employees were operating an abrasive wheel grinding machine where the distance between the tongue guard and the wheel was greater one-fourth inch.
Recent events (2)
- — I (S) $1606.8
- — Z (S) $2678
1910.215 D01
- Issued
- Oct 13, 2023
- Abate by
- Oct 25, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(d)(1):Wheel(s) on grinding machine(s) were not sounded (ring test) and inspected for damage before mounting: On or about July 28, 2023, and at times prior thereto, in the shop area employees were not instructed to conduct a "ring test" to check for cracks prior to mounting a new wheel on an abrasive grinding machine.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Oct 13, 2023
- Penalty
- Initial $2,277 · Current $1,366 Reduced
General-duty citation text
29 CFR 1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: On or about July 27, 2023, and at times prior thereto, in shop areas employees used two compressed air nozzles for cleaning that did not reduce the pressure to below 30 p.s.i.
Recent events (2)
- — I (S) $1366.2
- — Z (S) $2277
More inspections at Fseb Enterprise, LLC
View Fseb Enterprise, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332510)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346871296.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.