Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: U.S. FISH AND WILDLIFE SERVICE, TOPPENISH NATIONAL WILDLIFE REFUGE

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of U.S. FISH AND WILDLIFE SERVICE, TOPPENISH NATIONAL WILDLIFE REFUGE in 21 PUMPHOUSE RD, TOPPENISH, WA 98948 (NAICS 924120). OSHA activity number 346879315.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch U.S. Fish and Wildlife Service, Toppenish National Wildlife Refuge — free Get an email when a new federal OSHA severe-injury report for U.S. Fish and Wildlife Service, Toppenish National Wildlife Refuge is published. One employer, no account, unsubscribe in one click.
Site address
21 PUMPHOUSE RD
City
TOPPENISH
State
WA
ZIP
98948
Mailing
21 PUMPHOUSE RD, TOPPENISH, WA 98948
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
924120
Employees
3
Ownership type
D

8 citations on file for this inspection.

1910.28 B01 I

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 25, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the systems (guardrail, safety net, personal fall protection systems) described in 29 CFR 1910.28(b)(1)(i):  a) Shop Building, on or about July 25, 2023, fall protection was not provided to employees that used an extension ladder to gain access to the roof top during the installation of an antenna dish. Employees worked from the unprotected edge of the roof measuring approximately 16-20 feet above ground level.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C06 I

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 25, 2023
Abate by
Jan 22, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed:  a) Facilities Maintenance, where an annual review of the lockout tagout program was not conducted. Employees performed preventative maintenance and repairs on gasoline and diesel operated equipment, including but not limited to, the John Deere riding mower, CAT 420F2IT backhoe, CAT D3 bulldozer, and the Hyster 100 forklift.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.178 A04

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Sep 25, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:  a) Maintenance Shop, where a job made personnel platform was used in conjunction with the Hyster forklift during the repair of the overhead garage door located in the equipment bay.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.178 L04 III

Other-than-serious Gravity 5 1 instance 1 exposed
Issued
Sep 25, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  a) Maintenance Department, where the forklift operator was not evaluated on peformance within the past three years.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.178 L06

Other-than-serious Gravity 1 1 instance 1 exposed
Issued
Sep 25, 2023
Abate by
Nov 13, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6): The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation:  a) Maintenance Department, where the forklift operator training/evalutation provided on August 9, 2023, did not contain the date of the evaluation and identity of the person(s) performing the training or evaluation.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.242 B

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
Sep 25, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  a) Equipment Shop, where compressed air set at 80 p.s.i. was used to clean equipment such as, the air filters installed in the CAT 420F2IT backhoe and the CAT D3 bulldozer.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.29 B13 I

Deleted Repeat Gravity 5 1 instance 2 exposed
Issued
Sep 25, 2023
Abate by
Nov 13, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.29(b)(13)(i): The guardrail system opening used around holes that serve as points of access (such as ladderways),  did not have a self-closing gate that slides or swings away from the hole, and was equipped with a top rail and midrail or equivalent intermediate member that met the requirements in paragraph (b) of this section:   a) Wood Shop Overhead Storage, where the opening at the access point of the alternating tread stairs was not equipped with self-closing gate, exposing employees to a fall of approximately 8-10 feet to the lower-level concrete floor.  The U.S. Fish and Wildlife Service was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.29(b)(13)(i), which was contained in OSHA inspection number 1616925, citation number 1, item number 1, and was affirmed as a final order on November 3, 2022, with respect to a workplace located at Olympia, WA.
Recent events (2)
  • — I (R) $0
  • — Z (R) $0

1910.147 C04 I

Repeat Gravity 1 1 instance 1 exposed
Issued
Sep 25, 2023
Abate by
Jan 22, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) Maintenance Department, written procedures had not been developed where employees performed preventative maintenance and repairs on gasoline and diesel operated equipment, and implements, including but not limited to, the John Deere riding mower, mower "bat wing" implement, CAT 420F2IT backhoe, CAT D3 bulldozer, and the Hyster 100 forklift.  The U.S. Fish and Wildlife Service was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(4)(i), which was contained in OSHA inspection number 1616925, citation number 1, item number 2, and was affirmed as a final order on November 3, 2022, with respect to a workplace located at Olympia, WA.
Recent events (3)
  • — F (R) $0
  • — C (R) $0
  • — Z (R) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346879315.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.