HARLINGEN, TX —
OSHA Inspection: ATLANTIC DURANT TECHNOLOGY, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ATLANTIC DURANT TECHNOLOGY, INC. in 5801 PROGRESS DRIVE, HARLINGEN, TX 78550 (NAICS 332119). OSHA activity number 346885247.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATLANTIC DURANT TECHNOLOGY, INC.
- Site address
- 5801 PROGRESS DRIVE
- City
- HARLINGEN
- State
- TX
- ZIP
- 78550
- Mailing
- 19963 PROGRESS DRIVE, STRONGSVILLE, OH 44149
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332119
- Employees
- 36
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 A02 II B
- Issued
- Jan 22, 2024
- Abate by
- Feb 14, 2024
- Penalty
- Initial $16,131 · Current $12,098 Reduced
General-duty citation text
29 CFR 1910.147(a)(2)(ii)(B): An employee is required to place any part of his or her body into an area on a machine or piece of equipment where work is actually performed upon the material being processed (point of operation) or where an associated danger zone exists during a machine operating cycle: On or about July 27, 2023, and times prior to, at Plant 4, Press Machine #7, the employer failed to ensure an employee did not place a part of his body into the press machine during the operating cycle exposing the employee to crushing and struck-by injuries.
Recent events (2)
- — I (S) $12098.25
- — Z (S) $16131
1910.147 E02 I
- Issued
- Jan 22, 2024
- Abate by
- Feb 14, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(e)(2)(i): Before lockout or tagout devices were removed and energy was restored to the machine or equipment, authorized employees did not ensure that all employees had been safely positioned or removed from the work area: On or about July 27, 2023, and times prior to, at Plant 4, Press Machine #7, the employer failed to ensure employees had been safely positioned away from the press machine prior to energizing the machine exposing employees to crushing and struck-by injuries.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- Jan 22, 2024
- Abate by
- Feb 14, 2024
- Penalty
- Initial $16,131 · Current $12,098 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about July 27, 2023, and times prior to, at Plant 4, Press Machine #7, the employer failed to develop machine specific lock out tag out procedures exposing employees to crushing and struck-by injuries.
Recent events (2)
- — I (S) $12098.25
- — Z (S) $16131
1910.217 G01
- Issued
- Jan 22, 2024
- Abate by
- Feb 14, 2024
- Penalty
- Initial $6,913 · Current $5,185 Reduced
General-duty citation text
29 CFR 1910.217(g)(1): The employer did not, within 30 days of the occurrence, report to either the Director of the Directorate of Safety Standards Programs, OSHA, U.S. Department of Labor, Washington, D.C. 20210, or the State agency administering a plan approved by the Assistant Secretary of Labor for Occupational Safety and Health, all point of operation injuries to operators or other employees. On or about July 27, 2023, and times prior to, at Plant 4, Press Machine #7, an employee sustained disabling injuries requiring hospitalization, in which the employer failed to report the work-related event within 30 days of the incident occurring.
Recent events (2)
- — I (S) $5184.75
- — Z (S) $6913
More inspections at Atlantic Durant Technology, INC.
View Atlantic Durant Technology, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332119)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346885247.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.