HOUSTON, TX ·
OSHA Inspection: DCP SPRING ACQUISITION COMPANY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DCP SPRING ACQUISITION COMPANY INC. in 9740 TANNER ROAD, HOUSTON, TX 77041 (NAICS 332613). OSHA activity number 346893027.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DCP SPRING ACQUISITION COMPANY INC.
- Site address
- 9740 TANNER ROAD
- City
- HOUSTON
- State
- TX
- ZIP
- 77041
- Mailing
- 9740 TANNER ROAD, HOUSTON, TX 77041
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332613
- Employees
- 15
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 28, 2023
- Abate by
- Dec 15, 2023
- Penalty
- Initial $7,813 · Current $4,688 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. On or about August 4, 2023, an employee was exposed to a struck-by hazard when setting up a die on a mechanical power press without control of hazardous energy procedures being developed, documented, and utilized. b. On or about July 26, 2023, an employee was exposed to caught-by hazards when setting up a coiling machine without control of hazardous energy procedures being developed and utilized.
Recent events (2)
- · I (S) $4687.8
- · Z (S) $7813
1910.147 D03
- Issued
- Sep 28, 2023
- Abate by
- Dec 15, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s):( a. On or about August 4, 2023, an employee was exposed to a struck-by hazard when setting up a die on a mechanical power press without the machine being isolated from its energy sources. b. On or about July 26, 2023, an employee was exposed to caught-by hazards when setting up a coiling machine without the machine being isolated from its energy source.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.147 D04 I
- Issued
- Sep 28, 2023
- Abate by
- Dec 15, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a. On or about August 4, 2023, an employee was exposed to a struck-by hazard when setting up a die on a mechanical power press without locking out each energy isolating device. b. On or about July 26, 2023, an employee was exposed to caught-by hazards when setting up a coiling machine without locking out each energy isolating device.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.212 A01
- Issued
- Sep 28, 2023
- Abate by
- Dec 15, 2023
- Penalty
- Initial $7,813 · Current $4,688 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. On or about July 26, 2023, an employee was exposed to a caught-by hazard due to unguarded ingoing nip points on the W24 coiling machine.
Recent events (2)
- · I (S) $4687.8
- · Z (S) $7813
1910.217 C01 I
- Issued
- Sep 28, 2023
- Abate by
- Oct 11, 2023
- Penalty
- Initial $7,813 · Current $4,688 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i):The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es): On or about August 4, 2023, an employee was exposed to a struck-by hazard when using a foot pedal to operate a mechanical power press that did not have a point of operation guard.
Recent events (2)
- · I (S) $4687.8
- · Z (S) $7813
More inspections in this industry (NAICS 332613)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 346893027.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.