ERIE, PA —
OSHA Inspection: 4FRONT SOLUTIONS LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of 4FRONT SOLUTIONS LLC in 8140 HAWTHORNE DRIVE, ERIE, PA 16509 (NAICS 334419). OSHA activity number 346899594.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- 4FRONT SOLUTIONS LLC
- Site address
- 8140 HAWTHORNE DRIVE
- City
- ERIE
- State
- PA
- ZIP
- 16509
- Mailing
- 8140 HAWTHORNE DRIVE, ERIE, PA 16509
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334419
- Employees
- 160
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.133 A01
- Issued
- Sep 21, 2023
- Abate by
- Oct 3, 2023
- Penalty
- Initial $6,831 · Current $4,782 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: a.) 4front Solutions LLC, various production areas, on or about August 10th, 2023 and times prior thereto: Employees worked with and around corrosive chemicals including, but not limited to, Betco brand Extreme (floor stripper) during floor stripping operations. Employees did not utilize chemical goggles while performing work operations with corrosive chemicals. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $4781.7
- — Z (S) $6831
1910.132 D01 I
- Issued
- Sep 21, 2023
- Abate by
- Oct 3, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(1)(i): When the employer had assessed the workplace hazard(s) and determined that hazard(s) were present, the employer did not select and/or use the types of personal protective equipment that would protect the affected employee from the hazard: a.) 4front Solutions LLC, various production areas, on or about August 10th, 2023 and times prior thereto: Employees worked with and around corrosive chemicals including, but not limited to, Betco brand Extreme (floor stripper) during floor stripping operations. The employers hazard assessment did not require employees to utilize chemical goggles and/or face shield while performing work operations with corrosive chemicals. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 D02
- Issued
- Sep 21, 2023
- Abate by
- Oct 3, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2): a.) 4front Solutions LLC, various production areas, on or about August 10th, 2023 and times prior thereto: Employees worked with and around corrosive chemicals including, but not limited to, Betco brand Extreme (floor stripper) during floor stripping operations. The employers did not maintain a written hazard assessment for the floor stripping operations. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 334419)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346899594.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.