RAPID CITY, SD —
OSHA Inspection: B&T MANUFACTURING SD, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of B&T MANUFACTURING SD, LLC in 1600 SEDIVY LANE, RAPID CITY, SD 57703 (NAICS 332312). OSHA activity number 346911480.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B&T MANUFACTURING SD, LLC
- Site address
- 1600 SEDIVY LANE
- City
- RAPID CITY
- State
- SD
- ZIP
- 57703
- Mailing
- 1600 SEDIVY LANE, RAPID CITY, SD 57703
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 17
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.305 B01 II
- Issued
- Jan 3, 2024
- Abate by
- Jan 30, 2024
- Penalty
- Initial $3,572 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a)B&T Manufacturing SD, LLC at 1600 Sedivy Lane, Rapid City, SD 57703: On or about and at times prior to August 8, 2023, the employer did not ensure that unused openings in a breaker box located on the production floor were effectively closed. This condition exposed employees to electrical shock hazards.
Recent events (2)
- — I (O) $3000
- — Z (S) $3572
1910.305 G01 IV
- Issued
- Jan 3, 2024
- Abate by
- Jan 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Flexible cords and/ or cables were used for purposes prohibited by paragraphs (A) through (F) of 29 CFR 1910.305(g)(1)(iv): (a)B&T Manufacturing SD, LLC at 1600 Sedivy Lane, Rapid City, SD 57703: On or about and at times prior to August 8, 2023, the employer utilized a flexible cable that was was ran through a wall and used as a substitute for fixed wiring of a structure to power three relocatable power taps. This condition exposed employees to electrical shock and fire hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.305 J01 I
- Issued
- Jan 3, 2024
- Abate by
- Jan 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(j)(1)(i): Fixtures, lampholders, lamps, rosettes, and receptacles located within 8 feet of the floor had live parts exposed to employee contact: (a)B&T Manufacturing SD, LLC at 1600 Sedivy Lane, Rapid City, SD 57703: On or about and at times prior to August 8, 2023, the employer did not ensure employees were protected from exposed electrical hazards in that incandescent lighting directly above the miter saw work bench was guarded so as to prevent employee contact. This condition exposed employees to electrical shock hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.30 A01
- Issued
- Jan 3, 2024
- Abate by
- Jan 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.30(a)(1): The employer did not provide training for each employee who uses personal fall protection systems or who is required to be trained as specified elsewhere in this subpart before any employee is exposed to a fall hazard: (a)B&T Manufacturing SD, LLC at 1600 Sedivy Lane, Rapid City, SD 57703: On or about and at times prior to August 8, 2023, the employer did not ensure that employees were trained on the use of fall protection systems to include the use of personal fall arrest systems prior to use. This condition exposed employees to fall hazards associated with the use of fall protection systems.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.454 A
- Issued
- Jan 3, 2024
- Abate by
- Jan 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: (a)B&T Manufacturing SD, LLC at 1600 Sedivy Lane, Rapid City, SD 57703: On or about and at times prior to August 8, 2023, the employer did not ensure that employees were trained on the use of baker style scaffolding systems prior to use. This condition exposed employees to fall hazards while utilizing scaffolding systems within the facility.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332312)
More inspections in SD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346911480.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.