Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HOFFSTETTER TOOL & DIE INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of HOFFSTETTER TOOL & DIE INC. in 4371 112TH TERRACE NORTH, CLEARWATER, FL 33762 (NAICS 332710). OSHA activity number 346917560.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hoffstetter Tool & DIE INC. — free Get an email when a new federal OSHA severe-injury report for Hoffstetter Tool & DIE INC. is published. One employer, no account, unsubscribe in one click.
Site address
4371 112TH TERRACE NORTH
City
CLEARWATER
State
FL
ZIP
33762
Mailing
4371 112TH TERRACE NORTH, CLEARWATER, FL 33762
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
15
Ownership type
A

4 citations on file for this inspection.

1910.36 D01

Serious Gravity 1 1 instance 10 exposed
Issued
Feb 5, 2024
Abate by
Feb 15, 2024
Penalty
Initial $2,765 · Current $1,383 Reduced
29 CFR 1910.36(d)(1):  Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:  a) Storage and Fabrication Area - On or about August 15, 2023, the employer exposed employees to entrapment and fire hazards in that, all exit doors were equipped with a dead bolt and a twist knob locks.
Recent events (2)
  • — I (S) $1382.5
  • — Z (S) $2765

1910.147 C01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 5, 2024
Abate by
Feb 20, 2024
Penalty
Initial $4,610 · Current $2,305 Reduced
29 CFR  1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  (a) Production - On or about August 15, 2023, the employer exposed employees to struck by and crushing injuries while performing job tasks such as servicing, set up and repair to the press and CNC machinery. The employer did not develope a program to include, individual energy control procedures for each machinery, employee training and periodic inspections for potentially hazardous energy sources, such as but not limited to, electrical and pneumatic.
Recent events (2)
  • — I (S) $2305
  • — Z (S) $4610

1910.212 A03 II

Serious Gravity 10 1 instance 7 exposed
Issued
Feb 5, 2024
Abate by
Feb 15, 2024
Penalty
Initial $6,452 · Current $5,162 Reduced
29 CFR  1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle:  (a) On or about August 15, 2023, the employer exposed employees to injuries while operating a power press when the machinery was set up in a continuous mode with a magnetic guard in place allowing access to the point of operation.
Recent events (2)
  • — I (S) $5161.6
  • — Z (S) $6452

1910.1200 F06 II

Other-than-serious 7 instances 15 exposed
Issued
Feb 5, 2024
Abate by
Feb 20, 2024
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical:  a) Warehouse and Machine areas - On or about August 15, 2023, the employer exposed employees to injuries while using transfer chemical spray bottles and dispensing bottles without labeling for products such as but not limited to cleaners, Mean Green Degreaser, Air Lube Oil and Mixed Spirits while used when performing maintenance and repair of machinery.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Hoffstetter Tool & DIE INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346917560.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.