Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: QUALITY LATHE AND STUCCO CORP

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of QUALITY LATHE AND STUCCO CORP in 16560 POINT ROCK DRIVE, WINTER GARDEN, FL 34787 (NAICS 238310). OSHA activity number 346936818.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quality Lathe and Stucco Corp — free Get an email when a new federal OSHA severe-injury report for Quality Lathe and Stucco Corp is published. One employer, no account, unsubscribe in one click.
Site address
16560 POINT ROCK DRIVE
City
WINTER GARDEN
State
FL
ZIP
34787
Mailing
PO BOX 570402, ORLANDO, FL 32857
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238310
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.501 B13

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 21, 2023
Abate by
Oct 11, 2023
Penalty
Initial $3,349 · Current $3,349
29 CFR  1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   (a)   On or about 08/25/2023, at the jobsite located at 16560 Point Rock Dr. Winter Garden, FL 34787,  the employer allowed the installation of window trimming on a (10) feet high, 4/12 pitch roof,  and did not enforce the use of fall protection, exposing employees to fall hazards.
Recent events (1)
  • — Z (S) $3349

1926.1053 B04

Serious Gravity 1 1 instance 2 exposed
Issued
Sep 21, 2023
Penalty
Initial $2,009 · Current $2,009
29 CFR  1926.1053(b)(4):Ladder(s) were used for purposes other than the purpose for which they were designed:  (a)  On or about 08/25/2023, at the jobsite located at 16560 Point Rock Dr. Winter Garden, FL 34787,  the employer allowed the improper use of an A frame step ladder, it was being used in the closed position, exposing employees to fall hazards.
Recent events (1)
  • — Z (S) $2009

1926.100 A

Other-than-serious 1 instance 1 exposed
Issued
Sep 21, 2023
Abate by
Oct 11, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.100(a):Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a)  On or about 08/25/2023, at the jobsite located at 16560 Point Rock Dr. Winter Garden, FL 34787, the employer did not  provide head protection while employee worked below another employee installing window trims on a (10) feet high roof, exposing employee to struck by hazards.
Recent events (1)
  • — Z (O) $0

1926.503 B01

Other-than-serious 1 instance 1 exposed
Issued
Sep 21, 2023
Abate by
Nov 8, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.503(b)(1): The employer did not verify fall protection training by preparing a written certification record.  a) On or about 08/25/2023 at the jobsite located at 16560 Point Rock Dr. Winter Garden, FL 34787, the employer allowed the installation of window trimming on a (10) feet high, 12/4 pitch roof, and did not provide written fall protection training certification for the exposed employees.
Recent events (1)
  • — Z (O) $0

View Quality Lathe and Stucco Corp's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346936818.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.