Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ABASCO INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ABASCO INC in 5225 SOUTHWESTERN BOULEVARD, HAMBURG, NY 14075 (NAICS 332812). OSHA activity number 346940497.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Abasco INC — free Get an email when a new federal OSHA severe-injury report for Abasco INC is published. One employer, no account, unsubscribe in one click.
Establishment
ABASCO INC
Site address
5225 SOUTHWESTERN BOULEVARD
City
HAMBURG
State
NY
ZIP
14075
Mailing
5225 SOUTHWESTERN BOULEVARD, HAMBURG, NY 14075
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332812
Employees
42
Ownership type
A

5 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 21, 2023
Abate by
Oct 16, 2023
Penalty
Initial $7,813 · Current $0 Reduced
29 CFR  1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) On or about 08/28/2023, in the Pit Area; employees were exposed to amputation hazards when Lockout/Tagout (LOTO) procedures were not utilized to perform servicing and/or maintenance activities such as but not limited to; changing blades on the Hyd Mech Vertical Band Saw.  b) On or about 08/28/2023, in the Forming Area; employees were exposed to amputation hazards when Lockout/Tagout (LOTO) procedures were not utilized to perform servicing and/or maintenance activities such as but not limited to; changing dies on the ACCUPRESS press brake.   ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $0
  • — C (S) $7813
  • — Z (S) $7813

1910.147 C06 I

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 21, 2023
Abate by
Oct 16, 2023
Penalty
Initial $6,641 · Current $2,800 Reduced
29 CFR  1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:  a) On or about 08/28/2023, throughout the establishment, where employees perform servicing and/or maintenance activities on machines such as but not limited to: Hyd Mech Vertical Band Saw, the employer did not review the energy control program and procedures and each employee's responsibilities under the energy control procedure being inspected, at least annually.   ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $2800
  • — C (S) $6641
  • — Z (S) $6641

1910.1200 H01

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 21, 2023
Penalty
Initial $4,687 · Current $2,400 Reduced
29 CFR  1910.1200(h)(1):Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   a) On or about 08/28/2023, throughout the facility, employees who work daily with materials such as but not limited to; Praxair Green Texutre (containing barium sulfate) were exposed to chemical hazards when they were not provided with information and training on the hazardous materials they work with.   Employees must be informed of:  1)The requirements of this section; 2) Any operations where hazardous chemicals are present; AND 3) The location and availability of the written Hazard Communication Program, list(s) of hazardous chemicals and Safety Data Sheets  Employee training shall include at least:  1) Methods and observations that may be used to detect the presence of release of hazardous chemicals in the work area 2) The physical and health hazards of the chemicals in the work area  3) The measures employees can take to protect themselves such as specific procedures, appropriate work practices, emergency procedures and personal protective equipement to be used.  4) The details of the employers Hazard Communication Program include an explanation of labeling systems, Safety Data Sheets, and how employees can obtain and use the appropriate hazard information.   NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $2400
  • — C (S) $4687
  • — Z (S) $4687

1910.107 B05 I

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 21, 2023
Abate by
Nov 6, 2023
Penalty
Initial $6,250 · Current $2,800 Reduced
29 CFR  1910.107(b)(5)(i):The average air speed over the open face of the paint spray booth was less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics.   a) On or about 08/28/2023 in the powder spray booth; where the air flow across the face of the powder spray booth was 50 linear feet per minute or less exposing employees to health hazards.  ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $2800
  • — C (S) $6250
  • — Z (S) $6250

1910.107 B05 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 21, 2023
Abate by
Nov 6, 2023
Penalty
Initial $6,250 · Current $0 Reduced
29 CFR  1910.107(b)(5)(iv): Space within the spray booth on the downstream and upstream sides of filters were not protected with approved automatic sprinklers:  a) On or about 08/28/2023, in the powder coating spray booth area, employees were required to conduct powder coat spraying operations in a dry-type spray booth. The spray booth was not equipped with automatic sprinklers to protect the space with the spray booth on the downstream and upstream sides of the filter.   ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
  • — J (S) $0
  • — C (S) $6250
  • — Z (S) $6250

View Abasco INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346940497.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.