CHICAGO, IL —
OSHA Inspection: LAKESIDE METALS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of LAKESIDE METALS, INC. in 7505 SOUTH LAFLIN STREET, CHICAGO, IL 60620 (NAICS 332312). OSHA activity number 346957145.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LAKESIDE METALS, INC.
- Site address
- 7505 SOUTH LAFLIN STREET
- City
- CHICAGO
- State
- IL
- ZIP
- 60620
- Mailing
- 7505 SOUTH LAFLIN STREET, CHICAGO, IL 60620
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 46
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Nov 9, 2023
- Abate by
- Nov 30, 2023
- Penalty
- Initial $10,938 · Current $7,073 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. a. On or about June 13, 2023, Production Floor, the written energy control program did not include machine specific step by step procedures to control and lockout energy sources, for employees who may perform service and maintenance (setting up) on Scrap Trim Oscillator while equipment is energized. A machine operator sustained a right forearm injury leading to hospitalization while attaching scrap trim from 18" slitter to rotating oscillator without equipment being deenergized. Employees were thereby exposed to the hazards associated with mechanical motion, specifically, reciprocating moving parts.
Recent events (2)
- — I (S) $7073
- — Z (S) $10938
1910.147 C06 I
- Issued
- Nov 9, 2023
- Abate by
- Nov 30, 2023
- Penalty
- Initial $10,938 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed. a. On or about June 13, 2023, in the facility, employees were required to service and maintain machines and equipment, including, but not limited to, slitters, scorers, coil turners, and sheet flipper. The employer did not conduct a periodic inspection of each energy control procedure at least annually to ensure that the procedure and the requirements of the standard were being followed.
Recent events (2)
- — I (S) $0
- — Z (S) $10938
1910.147 C07 I A
- Issued
- Nov 9, 2023
- Abate by
- Nov 30, 2023
- Penalty
- Initial $10,938 · Current $7,073 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control. a. On?or about?June 13, 2023, Production Floor, the?employer failed?to provide?training to?each authorized?employee performing?service and/or?maintenance to?machinery or?equipment to?ensure the?employee acquired?the knowledge?and skills?required for?the safe?application, usage?and removal?of energy?control devices.?? A machine operator sustained?a right forearm injury resulting in hospitalization due to scrap trim oscillator not being de-energized and locked out during servicing (setting up) of this equipment.
Recent events (2)
- — I (S) $7073
- — Z (S) $10938
1910.147 D
- Issued
- Nov 9, 2023
- Abate by
- Nov 30, 2023
- Penalty
- Initial $10,938 · Current $7,073 Reduced
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6). a. On or about June 13, 2023, Production Floor, an employee was exposed to machine hazards associated with moving parts and pinch-points while performing service and maintenance (setup) on 18" American National Slitter. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)((i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.
Recent events (2)
- — I (S) $7073
- — Z (S) $10938
1904.39 A02
- Issued
- Nov 9, 2023
- Penalty
- Initial $11,162 · Current $5,581 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. a. On or about June 13, 2023, in the facility, the employer did not contact OSHA within 24 hours when an employee sustained a work-related injury that resulted in a hospitalization.
Recent events (2)
- — I (O) $5581
- — Z (O) $11162
More inspections at Lakeside Metals, INC.
View Lakeside Metals, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346957145.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.