SOUTH WINDSOR, CT —
OSHA Inspection: ANTHONY J. BONITO
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ANTHONY J. BONITO in 84 JOHN FINCH BOULEVARD, SOUTH WINDSOR, CT 06074 (NAICS 447110). OSHA activity number 346969009.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ANTHONY J. BONITO
- Site address
- 84 JOHN FINCH BOULEVARD
- City
- SOUTH WINDSOR
- State
- CT
- ZIP
- 06074
- Mailing
- 84 JOHN FITCH BOULEVARD, SOUTH WINDSOR, CT 06074
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 447110
- Employees
- 7
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.303 G02 I
- Issued
- Nov 16, 2023
- Abate by
- Nov 22, 2023
- Penalty
- Initial $4,465 · Current $3,126 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): 84 John Fitch Boulevard: On or about, September 12, 2023, Employees were not guarded from accidental contact with live parts or electrical equipment operating at 50 volts or more because approved cabinets or other forms of approved enclosures were not in place or being properly utilized.
Recent events (2)
- — I (S) $3125.5
- — Z (S) $4465
1910.303 B07 I
- Issued
- Nov 16, 2023
- Abate by
- Nov 22, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment. 84 John Fitch Boulevard: On or about, September 12, 2023, Employees were exposed to unused openings in boxes, cabinets, equipment cases, and housings that were not effectively closed to afford protection substantially equivalent to the wall of equipment.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B07 III
- Issued
- Nov 16, 2023
- Abate by
- Nov 22, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(iii): Internal parts of electrical equipment, including busbars, wiring terminals, insulators, and other surfaces, may not be damaged or contaminated by foreign materials such as paint, plaster, cleaners, abrasives, or corrosive residues. 84 John Fitch Boulevard: On or about, September 12, 2023, Employees were exposed to internal parts of electrical equipment, including busbars and insulators, that were missing, damaged, or contaminated.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.334 A01
- Issued
- Nov 16, 2023
- Abate by
- Nov 22, 2023
- Penalty
- Initial $4,465 · Current $3,126 Reduced
General-duty citation text
29 CFR 1910.334(a)(1): Handling. Portable equipment shall be handled in a manner which will not cause damage. Flexible electric cords connected to equipment may not be used for raising or lowering the equipment. Flexible cords may not be fastened with staples or otherwise hung in such a fashion as could damage the outer jacket or insulation. 84 John Fitch Boulevard: On or about September 12, 2023, the Employer did not fasten flexible cords in such a fashion that would prevent damage to the outer jacket or insulation. Multiple flexible cords were installed in a semi-permanent fashion routed through the worksite many and dated, hydraulic, HVAC, and electrical, and plumbing lines, allowing opportunity for damage and misuse.
Recent events (2)
- — I (S) $3125.5
- — Z (S) $4465
1910.334 A04
- Issued
- Nov 16, 2023
- Abate by
- Nov 22, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(4): Conductive work locations. Portable electric equipment and flexible cords used in highly conductive work locations (such as those inundated with water or other conductive liquids), or in job locations where employees are likely to contact water or conductive liquids, shall be approved for those locations. 84 John Fitch Boulevard: On or about September 12, 2023, Employees were exposed to flexible cords used in a semi-permanent fashion, embedded with other infrastructure lines, in highly conductive work locations.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 447110)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346969009.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.