Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GRANGES AMERICAS INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of GRANGES AMERICAS INC. in 3814 HWY 67 N, NEWPORT, AR 72112 (NAICS 331524). OSHA activity number 346973738.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Granges Americas INC. — free Get an email when a new federal OSHA severe-injury report for Granges Americas INC. is published. One employer, no account, unsubscribe in one click.
Site address
3814 HWY 67 N
City
NEWPORT
State
AR
ZIP
72112
Mailing
3814 HWY 67 N, NEWPORT, AR 72112
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331524
Employees
110
Ownership type
A

4 citations on file for this inspection.

1910.219 C04 I

Serious Gravity 10 1 instance 110 exposed
Issued
Mar 6, 2024
Abate by
Mar 25, 2024
Penalty
Initial $16,131 · Current $11,291 Reduced
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft:  On or about September 12, 2024, at the Inta-Roto (IR) Coater Slitter (Serial: 82M-COAT-01), a rotating projecting shaft end was not guarded.
Recent events (2)
  • — I (S) $11291
  • — Z (S) $16131

1910.147 C04 I

Serious Gravity 10 1 instance 6 exposed
Issued
Mar 6, 2024
Abate by
Apr 1, 2024
Penalty
Initial $16,131 · Current $16,131
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  On or about September 6, 2024, at the Inta-Roto (IR) Coater Slitter (Serial: 82M-COAT-01), employees performed maintenance activities including, but not limited to setting up and threading the slitter separator, without using machine specific energy control procedures.
Recent events (2)
  • — I (S) $16131
  • — Z (S) $16131

1910.147 F03 I

Serious Gravity 10 1 instance 6 exposed
Issued
Mar 6, 2024
Abate by
Apr 1, 2024
Penalty
Initial $16,131 · Current $0 Reduced
29 CFR 1910.147(f)(3)(i):  A procedure was not utilized to afford the employees a level of protection equivalent to that provided by the implementation of a personal lockout or tagout device when servicing and/or maintenance was performed by a crew, craft, department or other group:  On or about September 6, 2024, at the Inta-Roto (IR) Coater Slitter (Serial: 82M-COAT-01), employees performed maintenance activities including, but not limited to setting up and threading the slitter separator.  A group lockout procedure was not utilized, exposing employees to making contact with the ingoing nip points of the unguarded rotating rollers.
Recent events (2)
  • — I (S) $0
  • — Z (S) $16131

1910.147 C07 I A

Other-than-serious Gravity 10 1 instance 6 exposed
Issued
Mar 6, 2024
Abate by
Apr 1, 2024
Penalty
Initial $16,131 · Current $16,131
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation:    On or about September 6, 2023, at the Inta-Roto (IR) Coater Slitter (Serial: 82M-COAT-01), employees performing maintenance activities such as, but not limited to setting up and threading the slitter separator were not provided adequate training.
Recent events (2)
  • — I (O) $16131
  • — Z (S) $16131

View Granges Americas INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346973738.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.