Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: B P & T CO. DBA BP & T CO.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of B P & T CO. DBA BP & T CO. in WILLOW AND LANDWEHR ROAD, NORTHBROOK, IL 60062 (NAICS 238320). OSHA activity number 347015141.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch B P & T CO. DBA BP & T CO. — free Get an email when a new federal OSHA severe-injury report for B P & T CO. DBA BP & T CO. is published. One employer, no account, unsubscribe in one click.
Site address
WILLOW AND LANDWEHR ROAD
City
NORTHBROOK
State
IL
ZIP
60062
Mailing
119 S EMERSON STREET UNIT 178, MOUNT PROSPECT, IL 60056
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238320
Employees
6
Ownership type
A

6 citations on file for this inspection.

1903.19 D01

Other-than-serious 1 instance 1 exposed
Issued
Oct 8, 2024
Abate by
Nov 4, 2024
Penalty
Initial $518 · Current $518
29 CFR  1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  a) B P & T Co. dba BP & T Co. failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:  Citation Number	Item Number	Abatement Date 01	2a	12/26/2023 01	3a	12/26/2023 01	3b	12/26/2023
Recent events (1)
  • — Z (O) $518

1926.100 A

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 13, 2023
Penalty
Initial $5,358 · Current $2,600 Reduced
29 CFR  1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a) On October 5, 2023, at the above addressed jobsite, employees were exposed to impact with overhead structures while in a moving aerial lift.  The employees were not wearing hard hats.  No abatement certification or documentation is required for this item.
Recent events (3)
  • — F (S) $2600
  • — C (S) $5358
  • — Z (S) $5358

1926.453 B02 IV

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 13, 2023
Abate by
Dec 26, 2023
Penalty
Initial $4,465 · Current $3,200 Reduced
29 CFR  1926.453(b)(2)(iv): Employee(s) working in an aerial lift were not standing firmly on the floor of the basket:  a) On October 5, 2023, at the above addressed jobsite, employees was exposed to the hazard of falling up to approximately 20 feet standing on the midrails of the JLG 400S Telescopic Boom Lift aerial lift platform.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — F (S) $3200
  • — C (S) $4465
  • — Z (S) $4465

1926.453 B02 V

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 13, 2023
Penalty
Initial $6,250 · Current $0 Reduced
29 CFR  1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift:  a) On October 5, 2023, at the above addressed jobsite, an employee was exposed to the hazard of being ejected or bounced out of an aerial lift platform because a full body harness was not worn with a lanyard attached to the boom or basket while in the JLG SkyPower 400S Aerial Lift maneuvering to a work location.  No abatement certification or documentation is required for this item.
Recent events (3)
  • — F (S) $0
  • — C (S) $6250
  • — Z (S) $6250

1926.454 A

Serious Gravity 10 1 instance 1 exposed
Issued
Dec 13, 2023
Abate by
Dec 26, 2023
Penalty
Initial $6,250 · Current $3,200 Reduced
29 CFR  1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of aerial lift being used and to understand the procedures to control or minimize those hazards:  a) On October 5, 2023, at the above addressed jobsite, the employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the applicable regulations or how to control or eliminate any hazards associated with the work being performed.  The employer did not provide training and instruction to employee(s) that were assigned to operate and move the JLG SkyPower 400S Aerial Lift.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — F (S) $3200
  • — C (S) $6250
  • — Z (S) $6250

1926.502 D21

Serious Gravity 5 1 instance 2 exposed
Issued
Dec 13, 2023
Abate by
Dec 26, 2023
Penalty
Initial $4,465 · Current $0 Reduced
29 CFR  1926.502(d)(21): Personal fall arrest systems were not inspected prior to each use for wear, damage, and other deterioration, and/or defective components were not removed from service:  a) On October 5, 2023, at the above addressed jobsite, employees were using damaged lanyards as part of a personal fall arrest system.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • — F (S) $0
  • — C (S) $4465
  • — Z (S) $4465

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347015141.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.