POTTSTOWN, PA —
OSHA Inspection: EAGLE MICROSYSTEMS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of EAGLE MICROSYSTEMS, INC. in 366 CIRCLE OF PROGRESS DRIVE, POTTSTOWN, PA 19464 (NAICS 334418). OSHA activity number 347016248.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EAGLE MICROSYSTEMS, INC.
- Site address
- 366 CIRCLE OF PROGRESS DRIVE
- City
- POTTSTOWN
- State
- PA
- ZIP
- 19464
- Mailing
- 366 CIRCLE OF PROGRESS DRIVE, POTTSTOWN, PA 19464
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334418
- Employees
- 9
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.219 B01
- Issued
- Mar 8, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv): (a) Machine Work Area, Back Shop: On or about October 5, 2023, employees operated machinery around an air compressor with an unguarded flywheel that was four feet, seven inches from the floor.
Recent events (1)
- — Z (S) $0
1910.219 D01
- Issued
- Mar 8, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Machine Work Area, Back Shop: On or about October 5, 2023, employees operated machinery around an air compressor with an unguarded pulley that was four feet, seven inches from the floor.
Recent events (1)
- — Z (S) $0
1910.219 E01 I
- Issued
- Mar 8, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i):Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): (a) Machine Work Area, Back Shop: On or about October 5, 2023, employees operated a Bridgeport Milling machine with an unguarded horizontal belt that was five feet, eleven inches from the floor.
Recent events (1)
- — Z (S) $0
1910.219 E03 I
- Issued
- Mar 8, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): (a) Machine Work Area, Back Shop: On or about October 5, 2023, employees operated machinery around an air compressor with an unguarded inclined belt that was four feet, seven inches from the floor.
Recent events (1)
- — Z (S) $0
More inspections at Eagle Microsystems, INC.
View Eagle Microsystems, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 334418)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347016248.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.