Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ALLIED-LOCKE INDUSTRIES, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ALLIED-LOCKE INDUSTRIES, INC. in 224 INDUSTRIAL CIRCLE, UNION, MS 39365 (NAICS 333613). OSHA activity number 347017287.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Allied-Locke Industries, INC. — free Get an email when a new federal OSHA severe-injury report for Allied-Locke Industries, INC. is published. One employer, no account, unsubscribe in one click.
Site address
224 INDUSTRIAL CIRCLE
City
UNION
State
MS
ZIP
39365
Mailing
224 INDUSTRIAL CIRCLE, UNION, MS 39365
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333613
Employees
45
Ownership type
A

4 citations on file for this inspection.

1910.95 G01

Serious Gravity 1 2 instances 45 exposed
Issued
Nov 29, 2023
Abate by
Dec 21, 2023
Penalty
Initial $6,696 · Current $4,687 Reduced
29 CFR  1910.95(g)(1):The employer did not establish and maintain an audiometric testing program as provided by 29 CFR 1910.95(g) by making audiometric testing available to all employees whose exposures equal or exceed an 8-hour time-weighted average of 85 decibels:  (a) Assembly Welding- On or about October 17, 2023, a welder was exposed to continuous noise at 70.0% of the permissible exposure limit (8-hour time weighted average sound level of 85 dBA) or an equivalent sound level of approximately 87 dBA during the 437 min sampling period.     (b) Welding Department- On or about October 17, 2023, a machinist was exposed to continuous noise at 77.4% of the permissible exposure limit (8-hour time weighted average sound level of 85 dBA) or an equivalent sound level of approximately 88 dBA during the 459 min sampling period.
Recent events (2)
  • — I (S) $4687.2
  • — Z (S) $6696

1910.1025 H01

Serious Gravity 1 1 instance 45 exposed
Issued
Nov 29, 2023
Abate by
Dec 21, 2023
Penalty
Initial $6,696 · Current $4,687 Reduced

Hazardous substances 1591

29 CFR  1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations of lead:  (a)  Break Area - On or about October 4, 2023, the employer did not ensure the table in the breakroom was free of lead which contained an accumulation of 1.48 micrograms exposing employees to an ingestion hazard.
Recent events (2)
  • — I (S) $4687.2
  • — Z (S) $6696

1910.151 C

Other-than-serious 1 instance 45 exposed
Issued
Nov 29, 2023
Abate by
Dec 15, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.151(c):Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:  (a)  Warehouse - On or about October 4, 2023, employees were exposed to corrosive material such as but not limited to battery acid while charging an electric golf cart in the warehouse area.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 F10

Other-than-serious 2 instances 45 exposed
Issued
Nov 29, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(10): The employer did not ensure that workplace labels or other forms of warnings were prominently displayed on the container or readily available in the work area throughout each work shift:  (a) Shipping/Receiving Dock - On or about October 4, 2023, the employer did not label a container containing diesel fuel with the appropriate identity, exposing employees to chemical hazard.  (b) Sprockets Area - On or about October 4, 2023, the employer did not label a dip tank containing Taxinol, exposing employees to a chemical hazard.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Allied-Locke Industries, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347017287.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.