HOUSATONIC, MA —
OSHA Inspection: WILLIAM LYON CARPENTRY AND SON
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of WILLIAM LYON CARPENTRY AND SON in 286 GREAT BARRINGTON RD., HOUSATONIC, MA 01236 (NAICS 238350). OSHA activity number 347017964.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WILLIAM LYON CARPENTRY AND SON
- Site address
- 286 GREAT BARRINGTON RD.
- City
- HOUSATONIC
- State
- MA
- ZIP
- 01236
- Mailing
- 483 GALE AVE., PITTSFIELD, MA 01201
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238350
- Employees
- 11
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 C01
- Issued
- Dec 12, 2023
- Abate by
- Jan 31, 2024
- Penalty
- Initial $4,465 · Current $3,126 Reduced
9000
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program (RPP) that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented where respirators were necessary to protect the health of employees: At 286 Great Barrington Rd. Housatonic, MA: On October 6, 2023, and at times prior, the employer did not implement a RPP for employees who are required to wear half-face elastomeric and filtering facepiece device respirators while sanding sheet rock, utilization of hazardous materials, and grinding concrete. ABATEMENT NOTE: A respirator program shall include the following elements: -Procedures for selecting respirators -Medical evaluations for employees required to use respirators -Procedures for fit testing tight fitting respirators -Procedures for proper use of respirators -Procedures and schedules for cleaning, storing, inspecting, and maintaining respirators -Training of employees about respiratory hazards in the workplace -Training on proper use of respirators -Procedures for regularly evaluating the effectiveness of the program *Abatement notes are intended only to provide clarity regarding existing requirements under the law or agency policies. Abatement notes do not create (or diminish) legal obligations under the Occupational Safety and Health Act.
Recent events (2)
- — I (S) $3125.5
- — Z (S) $4465
1910.134 H04
- Issued
- Dec 12, 2023
- Abate by
- Jan 31, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.134(h)(4): Respirators that failed an inspection or were otherwise found to be defective were not removed from service and discarded or repaired: At 286 Great Barrington Rd. Housatonic, MA: On October 6, 2023, and at times prior, the employer did not ensure that defective half-face elastomeric respirators were removed from service. A Safety Works 9200 half-face respirator was observed with cracks and holes in the elastomeric portion of the respirator and a damaged head strap. This condition exposed the employee to respirable crystalline silica.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 E01
- Issued
- Dec 12, 2023
- Abate by
- Jan 31, 2024
- Penalty
- Initial $3,572 · Current $2,500 Reduced
9000
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: At 286 Great Barrington Rd. Housatonic, MA: On October 6, 2023, and at times prior, the employer did not ensure employees were medical evaluated prior to using required-use half-face elastomeric respirators for sheet rock sanding, concrete grinding operations, and hazardous chemical use.
Recent events (2)
- — I (S) $2500.4
- — Z (S) $3572
1910.134 F01
- Issued
- Dec 12, 2023
- Abate by
- Jan 31, 2024
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employees using a tight-fitting facepiece respirator pass an appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT) as stated in this paragraph. At 286 Great Barrington Rd. Housatonic, MA: On October 6, 2023, and at times prior, the employer did not ensure that employees where quantitatively or qualitatively fit-tested for respirators prior to usage for sheet rock sanding, grinding stone, or handling hazardous chemicals.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at William Lyon Carpentry and SON
View William Lyon Carpentry and SON's full OSHA safety record →
More inspections in this industry (NAICS 238350)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347017964.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.