Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: VAN TASSEL-PROCTOR, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of VAN TASSEL-PROCTOR, INC. in 1434 N. BURNSIDE, GONZALES, LA 70707 (NAICS 236220). OSHA activity number 347030876.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch VAN Tassel-Proctor, INC. — free Get an email when a new federal OSHA severe-injury report for VAN Tassel-Proctor, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1434 N. BURNSIDE
City
GONZALES
State
LA
ZIP
70707
Mailing
5110 TALLEY ROAD, LITTLE ROCK, AR 72204
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
15
Ownership type
A

3 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 8, 2023
Penalty
Initial $3,572 · Current $3,572
29 CFR 1926.102(a)(1):29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles.  On or about October 10, 2023, an employee of a subcontractor under the control of the General Contractor performed masonry activities, cutting mason/bricks with a chop saw without using eye/face protection.
Recent events (2)
  • — I (S) $3572
  • — Z (S) $3572

1926.451 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 8, 2023
Penalty
Initial $4,465 · Current $3,628 Reduced
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffolds, structure, personnel hoist, or similar surface was not used. Cross braces were used as a means of access.  On or about October 10, 2023, On or about October 10, 2023, an employee of a subcontractor under the control of the General Contractor performed masonry activities and was not provided a safe means of access and egress to the upper levels of a scaffold and was exposed to fall hazards.
Recent events (2)
  • — I (S) $3628
  • — Z (S) $4465

1926.451 G01 VII

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Nov 8, 2023
Penalty
Initial $6,250 · Current $0 Reduced
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.  On or about October 10, 2023, employees worked on a scaffold greater than 10 feet high without any guardrail system while erecting a cinder block wall.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6250

View VAN Tassel-Proctor, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347030876.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.