Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RITTER FOODS LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of RITTER FOODS LLC in 3333 SOUTH 3RD STREET, PHILADELPHIA, PA 19148 (NAICS 311612). OSHA activity number 347032336.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ritter Foods LLC — free Get an email when a new federal OSHA severe-injury report for Ritter Foods LLC is published. One employer, no account, unsubscribe in one click.
Establishment
RITTER FOODS LLC
Site address
3333 SOUTH 3RD STREET
City
PHILADELPHIA
State
PA
ZIP
19148
Mailing
3333 SOUTH 3RD STREET, PHILADELPHIA, PA 19148
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311612
Employees
200
Ownership type
A

3 citations on file for this inspection.

1910.147 C04 II

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 11, 2024
Abate by
Apr 30, 2024
Penalty
Initial $14,518 · Current $9,437 Reduced
29 CFR  1910.147(c)(4)(ii):Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D).  a) Facility: Ritter Foods LLC, located at 3333 S 3rd St, Philadelphia, PA 19148. On about October 13, 2023, the employer did not ensure that specific procedures clearly and specifically outlined the steps to isolate and disable the machines such as, but not limited to the Amfect 150 meat grinder, and Pacproinc PP-200 in order to safely de-energize the equipment and control the hazardous electrical energy.  Employees were exposed to caught in between and struck by hazards  during cleaning and maintenance activities without specific energy control procedures to control hazardous energy.
Recent events (2)
  • — I (S) $9436.7
  • — Z (S) $14518

1910.147 C07 I

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 11, 2024
Abate by
Apr 17, 2024
Penalty
Initial $14,518 · Current $9,437 Reduced
29 CFR  1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program were understood by authorized, affected, and other employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by authorized employees:   a) Facility: Ritter Foods LLC, located at 3333 S 3rd St, Philadelphia, PA 19148. On about October 13, 2023, the employer did not ensure employees operating the Amfec 150 meat grinder were instructed in the purpose and use of the energy procedure.
Recent events (2)
  • — I (S) $9436.7
  • — Z (S) $14518

1910.212 A01

Serious Gravity 10 2 instances 3 exposed
Issued
Apr 11, 2024
Abate by
Apr 30, 2024
Penalty
Initial $14,518 · Current $9,437 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Facility: Ritter Foods LLC, located at 3333 S 3rd St, Philadelphia, PA 19148. On about October 13, 2023  a) The employer did not ensure the exposed auger blade of the Amfec 150 meat grinder was guarded while the machine was in use, thereby exposing employees to entanglement, caught in between and struck by hazards.  b) The employer did not ensure the exposed blades of the Pacproinc PPI-200 interleaving slicer were guarded while the machine was in use, thereby exposing employees to caught in between and struck by hazards.
Recent events (2)
  • — I (S) $9436.7
  • — Z (S) $14518

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347032336.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.