SELMA, AL —
OSHA Inspection: LEAR CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LEAR CORPORATION in 6 MEADOWCRAFT PKWY, SELMA, AL 36701 (NAICS 336360). OSHA activity number 347034902.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LEAR CORPORATION
- Site address
- 6 MEADOWCRAFT PKWY
- City
- SELMA
- State
- AL
- ZIP
- 36701
- Mailing
- 6 MEADOWCRAFT PKWY, SELMA, AL 36701
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336360
- Employees
- 115
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Nov 9, 2023
- Abate by
- Dec 11, 2023
- Penalty
- Initial $8,539 · Current $5,123 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. Pour Area: On or about October 16, 2023, and at times prior thereto, the employer exposed employees to crushed-by hazards in that employees were not required to utilize energy control procedures when performing maintenance in the robot cage.
Recent events (2)
- — I (S) $5123.4
- — Z (S) $8539
1910.147 D06
- Issued
- Nov 9, 2023
- Abate by
- Nov 22, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(6): Prior to starting work on machines or equipment that had been locked out or tagged out, the authorized employee did not verify that isolation and de-energization of the machine or equipment had been accomplished: a. Pour Area: On or about October 16, 2023, and at times prior thereto, the employer exposed employees to crushed by hazards in that the employer did not require the authorized employee to verify that isolation and de-energization of the machine or equipment had been accomplished by returning to the control room and attempting to restart the machine.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Nov 9, 2023
- Abate by
- Nov 22, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Pour Area: On or about October 16, 2023, and at times prior thereto, the employer exposed employees to crushed-by hazards in that the employer did not conduct a periodic inspection of the "Safe Entry to Pour Area" energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A04
- Issued
- Nov 9, 2023
- Penalty
- Initial $5,122 · Current $3,073 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a. Maintenance Area: On or about October 16, 2023, and at times prior thereto, the employees were exposed to struck by hazards in that the employer failed to ensure the tool rest on the Delta 8-inch bench grinder was adjusted to within one eighth of an inch from the grinding wheel periphery.
Recent events (2)
- — I (S) $3073.2
- — Z (S) $5122
1910.215 B09
- Issued
- Nov 9, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: a. Maintenance Area: On or about October 16, 2023 and at times prior thereto, employees were exposed to struck-by hazards in that the employer failed to ensure that the bench grinder was equipped with a tongue guard that could be adjusted to within one quarter of an inch of the abrasive wheel periphery.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Nov 9, 2023
- Abate by
- Nov 22, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Maintenance Shop Area - On or about August 02, 2023, and at times prior thereto, the drill press was not provided with guarding to protect the operator and other nearby employees from hazards created by point of operation, rotating parts and flying chips:
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Lear Corporation
View Lear Corporation's full OSHA safety record →
More inspections in this industry (NAICS 336360)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347034902.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.