SAINT LOUIS, MO —
OSHA Inspection: MISSOURI MACHINERY AND ENGINEERING CO.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MISSOURI MACHINERY AND ENGINEERING CO. in 4981 FYLER AVENUE, SAINT LOUIS, MO 63139 (NAICS 332710). OSHA activity number 347037301.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MISSOURI MACHINERY AND ENGINEERING CO.
- Site address
- 4981 FYLER AVENUE
- City
- SAINT LOUIS
- State
- MO
- ZIP
- 63139
- Mailing
- 4981 FYLER AVENUE, SAINT LOUIS, MO 63139
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 26
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Nov 17, 2023
- Abate by
- Dec 12, 2023
- Penalty
- Initial $10,938 · Current $6,563 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about 10/17/2023, the employer did not use one or more methods of machine guarding to protect employees at Missouri Machinery and Engineering Co. located at 4981 Fryler Ave. St. Louis, MO, from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and spark in the machine areas, to include but not limited to horizontal and vertical lathe machines.
Recent events (2)
- — I (S) $6562.8
- — Z (S) $10938
1910.303 F02
- Issued
- Nov 17, 2023
- Penalty
- Initial $9,376 · Current $5,626 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: On or about 10/17/2023, the employer did not ensure each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was legibly marked to indicate its purpose to protect employees from electrical hazards at Missouri Machinery and Engineering Co. located at 4981 Fryler Ave. St. Louis, MO.
Recent events (2)
- — I (S) $5625.6
- — Z (S) $9376
1910.303 G02 I
- Issued
- Nov 17, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision: On or about 10/17/2023, the employer did not ensure live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures to protect employees from electrical hazards at Missouri Machinery and Engineering Co. located at 4981 Fryler Ave. St. Louis, MO.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Nov 17, 2023
- Abate by
- Dec 12, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: On or about 10/17/2023, the employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees that work on machines and preform lockout tagout located at 4981 Fryler Ave., St. Louis, Missouri. Without the proper knowledge and safe application of energy control employees are exposed to caught-in and entanglement hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C06 I
- Issued
- Nov 17, 2023
- Abate by
- Dec 12, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: On or about 10/17/2023, the employer not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed by employees that work on machines and preform lockout tagout located at 4981 Fryler Ave., St. Louis, Missouri. Without the proper knowledge and safe application of energy control employees are exposed to caught-in and entanglement hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332710)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347037301.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.