OSHA Inspection: ABSOLUTE ROOFING SOLUTIONS, LLC

Issued

Jan 16, 2025

Abate by

Feb 21, 2025

Penalty

Initial $531 · Current $531

General-duty citation text

29 CFR  1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  a) On or about January 16, 2025, the employer failed to submit certification of corrective action for Citation 1, Item 1, issued on April 15, 2024, with an abatement due date of May 9, 2024.  b) On or about January 16, 2025, the employer failed to submit certification of corrective action for Citation 1, Item 2, issued on April 15, 2024, with an abatement due date of May 9, 2024.  c) On or about January 16, 2025, the employer failed to submit certification of corrective action for Citation 1, Item 3, Group a, issued on April 15, 2024, with an abatement due date of May 9, 2024.  d) On or about January 16, 2025, the employer failed to submit certification of corrective action for Citation 1, Item 3, Group b, issued on April 15, 2024, with an abatement due date of May 9, 2024.

Issued

Jan 16, 2025

Abate by

Feb 21, 2025

Penalty

Initial $531 · Current $531

General-duty citation text

29 CFR  1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required:   On or about January 16, 2025, the employer failed to submit documentation and certification of corrective action for Citation 1, Item 2, issued on April 15, 2024, with an abatement due date of May 9, 2024.

Issued

Apr 15, 2024

Abate by

May 9, 2024

Penalty

Initial $3,687 · Current $3,687

General-duty citation text

29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:   On or about October 25, 2023, employees performing roofing work using an air powered nail gun were not using eye protection.

Issued

Apr 15, 2024

Abate by

May 9, 2024

Penalty

Initial $6,452 · Current $6,452

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):    On or about October 25, 2023, employees were performing roofing activities such as, but not limited to installing underlayment, shingles, and flashing at heights greater than 6-feet, without fall protection on the following:  a) Building 2512;  b) Building 2524;  c) Building 2532.

Issued

Apr 15, 2024

Abate by

May 9, 2024

Penalty

Initial $4,610 · Current $4,610

General-duty citation text

29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access:  On or about October 25, 2023, employees were performing roofing activities such as, but not limited to installing underlayment, shingles, and flashing at heights greater than 6-feet, where the following:  a) On Building 2512 - ladders to access the roof from the ground level side rails did not extend 3-feet above the roof surface;  b) On Building 2524 - ladders to access the roof from the ground level side rails did not extend 3-feet above the roof surface.

Issued

Apr 15, 2024

Abate by

May 9, 2024

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladders were not used at an angle such than the horizontal distance from the top support to the foot of the ladder way approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support):   On or about October 25, 2023, employees were performing roofing activities such as, but not limited to installing underlayment, shingles, and flashing at heights greater than 6-feet where the following:   a) On Building 2512 used a ladder to access the roof from the ground level where the ladder was placed at angles less than 75 degrees.  b) On Building 2524 used a ladder to access the roof from the ground level where the ladder was placed at angles less than 75 degrees.  c) On Building 2532 used a ladder to access the roof from the ground level where the ladder was placed at angles less than 75 degrees.