Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LAKELAND COMPANY OF BARRON COUNTY, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of LAKELAND COMPANY OF BARRON COUNTY, INC. in 2537 US HWY 63, CUMBERLAND, WI 54829 (NAICS 332999). OSHA activity number 347069163.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Lakeland Company of Barron County, INC. — free Get an email when a new federal OSHA severe-injury report for Lakeland Company of Barron County, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2537 US HWY 63
City
CUMBERLAND
State
WI
ZIP
54829
Mailing
2537 US HWY 63, CUMBERLAND, WI 54829
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
25
Ownership type
A

5 citations on file for this inspection.

1910.178 L

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 9, 2023
Abate by
Dec 4, 2023
Penalty
Initial $5,313 · Current $3,453 Reduced
29 CFR 1910.178(l): Operators were not trained in the safe operation of powered industrial trucks:  (a) Throughout the facility/premises - interior & exterior; Operators of forklifts were not provided training by the employer before operating the machinery.
Recent events (2)
  • — I (S) $3453.45
  • — Z (S) $5313

1910.178 Q07

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 9, 2023
Abate by
Nov 20, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service:  (a) Throughout the facility/premises - interior & exterior; Forklifts are operated on a daily basis without being inspected before being placed into service.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.184 E03 I

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 9, 2023
Abate by
Nov 20, 2023
Penalty
Initial $5,313 · Current $3,453 Reduced
29 CFR 1910.184(e)(3)(i): Thorough periodic inspections of alloy steel chain slings in use were not made on a regular basis:  (a) Welding shop; Employees utilize various chain slings in combination with overhead cranes without the chains being inspected before use.
Recent events (2)
  • — I (S) $3453.45
  • — Z (S) $5313

1910.212 A01

Serious Gravity 5 3 instances 5 exposed
Issued
Nov 9, 2023
Abate by
Jan 12, 2024
Penalty
Initial $7,969 · Current $5,180 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a) Paint shop - southeast corner; Two Delta (Model: 18-900L) drill presses were operated without guarding for the chuck and bit, respectively.  (b) Fabrication area - eastern section of facility; Various Hougen (Model: HMD904) magnetic drills were operated without guarding for the chuck and bit, respectively.  (c) Throughout facility; Various DeWALT (Models: DCG412 & DWE402) hand-held angle grinders were operated without guarding to cut, grind, and sand steel material.
Recent events (2)
  • — I (S) $5179.85
  • — Z (S) $7969

1910.303 G01

Other-than-serious 1 instance 3 exposed
Issued
Nov 9, 2023
Abate by
Nov 20, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  (a) Welding shop; Various electrical panels were not readily accessible due to 36 inches of clearance not being maintained around the panel area.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Lakeland Company of Barron County, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347069163.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.