Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ADIRONDACK PRECISION CUT STONE, LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of ADIRONDACK PRECISION CUT STONE, LLC in 536 QUEENSBURY AVENUE, QUEENSBURY, NY 12804 (NAICS 327991). OSHA activity number 347069486.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Adirondack Precision CUT Stone, LLC — free Get an email when a new federal OSHA severe-injury report for Adirondack Precision CUT Stone, LLC is published. One employer, no account, unsubscribe in one click.
Site address
536 QUEENSBURY AVENUE
City
QUEENSBURY
State
NY
ZIP
12804
Mailing
536 QUEENSBURY AVENUE, QUEENSBURY, NY 12804
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
327991
Employees
11
Ownership type
A

5 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 16, 2024
Penalty
Initial $4,610 · Current $2,766 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  (a) On and before 10/30/2023, at facility, for the sawyer operating a fork truck to bring granite material from outside to inside.  The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).
Recent events (2)
  • — I (S) $2766
  • — Z (S) $4610

1910.179 J03

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 16, 2024
Penalty
Initial $4,610 · Current $2,766 Reduced
29 CFR 1910.179(j)(3):  Complete inspections of the cranes were not performed at intervals as defined in paragraph (J)(1)(ii)(b) of this section and as specifically indicated 29 CFR 1910.179(j)(3)(i)-(x):  (a) On and before 10/30/2023, at shop, for the fabricator and sawyer using the coffing 1 ton crane and detroit 10 ton crane and 1 ton hoist and 10 ton hoist to lift stone on a rack and slab on saw table.
Recent events (2)
  • — I (S) $2766
  • — Z (S) $4610

1910.1200 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Feb 16, 2024
Abate by
Mar 25, 2024
Penalty
Initial $2,765 · Current $1,659 Reduced
29 CFR 1910.1200(e)(1): Employer did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met, and which also includes the following:        a) On and before 10/30/2023, at shop, for the fabricator working with/around materials such as, but not limited to, Klean Strip Acetone to wipe glue off of stone.  Employer did not develop a hazard communication program.
Recent events (2)
  • — I (S) $1658.88
  • — Z (S) $2765

1910.1200 G08

Serious Gravity 1 1 instance 1 exposed
Issued
Feb 16, 2024
Abate by
Feb 23, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s):  a) On and before 10/30/2023, at shop, for the fabricator working with/around materials such as, but not limited to, Klean Strip Acetone to wipe glue off of stone.  Employer did not have safety data sheets available.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 1 1 instance 1 exposed
Issued
Feb 16, 2024
Abate by
Mar 25, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) On and before 10/30/2023, at shop, for the fabricator working with/around materials such as, but not limited to, Klean Strip Acetone to wipe glue off of stone.  Employer did not train employees on hazard communication.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347069486.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.