UTICA, NY —
OSHA Inspection: DANIEL A. BOLLEN
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DANIEL A. BOLLEN in 1930 BEECHGROVE PLACE, UTICA, NY 13501 (NAICS 492110). OSHA activity number 347073447.
Watch Daniel A. Bollen — free
Get an email when a new federal OSHA severe-injury report for Daniel A. Bollen is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- DANIEL A. BOLLEN
- Site address
- 1930 BEECHGROVE PLACE
- City
- UTICA
- State
- NY
- ZIP
- 13501
- Mailing
- 1930 BEECHGROVE PLACE, UTICA, NY 13501
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 492110
- Employees
- 20
- Ownership type
- A
Citations
8 citations on file for this inspection.
5(a)(1)
- Issued
- Abate by
- Penalty
- Initial $4610.00 · Current $1153.00 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to potential crushing hazards: a) On or about 11/1/2023, Bay 1, Maintenance Shop: Employees were utilizing a four-post BendPak HD-9 Auto lift, which had not been inspected and certified since 3/5/2014. b) On or about 11/1/2023, Bay 2, Maintenance Shop: A two-post Mohawk SYS-1 Auto lift, which had not been inspected and certified since 3/5/2014. Abatement certification is required for this item.
Recent events (3)
- — F (S) $1152.5
- — C (S) $4610
- — Z (S) $4610
1910.147 C04 I
- Issued
- Abate by
- Penalty
- Initial $4610.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 11/1/2023, Bay 1, Maintenance Shop: The employer required employees to conduct inspections, servicing and maintenance tasks on a four-post BendPak HD-9 Auto lift without utilizing means to isolate hazardous energy sources including, but not limited to pneumatic, hydraulic, electrical, and stored (potential) energies. No procedures were developed, documented or utilized. b) On or about 11/1/2023, Bay 1, Maintenance Shop: The employer required employees to conduct inspections, servicing and maintenance tasks on a two-post Mohawk SYS-1 Auto lift without utilizing means to isolate hazardous energy sources including, but not limited to pneumatic, hydraulic, electrical, and stored (potential) energies. No procedures were developed, documented or utilized. Abatement certification is required for this item.
Recent events (3)
- — F (S) $0
- — C (S) $4610
- — Z (S) $4610
1910.147 C05 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: a) On or about 11/1/2023, Bay 1, Maintenance Shop: Employees were not provided protective materials and hardware needed to isolate equipment such as, but not limited to, a four-post BendPak HD-9 Auto lift. b) On or about 11/1/2023, Bay 2, Maintenance Shop: Employees were not provided protective materials and hardware needed to isolate equipment such as, but not limited to, a two-post Mohawk SYS-1 Auto lift. Abatement certification is required for this item.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program is understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by employees. a) On or about 11/1/2023, Bay 1, Maintenance Shop: The employer did not provide training on Lockout/Tagout and the de-energization of equipment to employees. Equipment included, but is not limited to, a four-post BendPak HD-9 Auto lift. b) On or about 11/1/2023, Bay 2, Maintenance Shop: The employer did not provide training on Lockout/Tagout and the de-energization of equipment to employees. Equipment included, but is not limited to, a two-post Mohawk SYS-1 Auto lift. Abatement certification is required for this item.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Abate by
- Penalty
- Initial $3687.00 · Current $922.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 11/1/2023, Maintenance Shop: The rotating spindle and chuck on a Craftsman 15 inch Drill Press was not guarded. Abatement certification is required for this item.
Recent events (3)
- — F (S) $921.75
- — C (S) $3687
- — Z (S) $3687
1910.215 A02
- Issued
- Abate by
- Penalty
- Initial $3687.00 · Current $922.00 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive Wheels: The safety guard did not cover the spindle end, nut, and flange projections. a) On or about 11/1/2023, Maintenance Shop: A bench grinder had an unguarded spindle end and nut. Abatement certification is required for this item.
Recent events (3)
- — F (S) $921.75
- — C (S) $3687
- — Z (S) $3687
1910.215 A04
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(a)(4): Work rests were not kept adjusted closely to the wheel with a maximum opening of one-eighth inch. a) On or about 11/1/2023, Maintenance Shop: A grinding wheel's work rest was not adjusted to a maximum opening of one-eighth inch. The distance was measured at 1 inch from the rest to the wheel. Abatement certification is required for this item.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top exceeded one-fourth inch. a) On or about 11/1/2023, Maintenance Shop: A grinding wheel was missing the adjustable tongue. Abatement certification is required for this item.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 492110)
CARTERET, NJ—2026-07-09
UNIUNI LOGISTICS INC
PITTSTON, PA—2026-07-08
FEDERAL EXPRESS CORPORATION
SAINT PAUL, MN—2026-07-06
111531 - UNITED PARCEL SERVICE INC
GARNER, NC—2026-07-06
161499 - AMAZON.COM SERVICES LLC
NEWPORT NEWS, VA—2026-07-06
UPS
More inspections in NY
POUGHKEEPSIE, NY—2026-07-13
MARCO BOARD HOUSE, INC.
CORTLANDT MANOR, NY—2026-07-13
LG BUILDERS INC.
CORTLANDT MANOR, NY—2026-07-13
RJW RENOVATIONS, LLC
HEMPSTEAD, NY—2026-07-13
NYSDOCCS NASSAU AREA OFFICE
NIAGARA FALLS, NY—2026-07-10
NTVI FEDERAL INC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347073447.