SCOTIA, NY —
OSHA Inspection: CODINO'S FOODS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CODINO'S FOODS, INC. in 704 CORPORATIONS PARK, SCOTIA, NY 12302 (NAICS 311412). OSHA activity number 347086167.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CODINO'S FOODS, INC.
- Site address
- 704 CORPORATIONS PARK
- City
- SCOTIA
- State
- NY
- ZIP
- 12302
- Mailing
- 704 CORPORATIONS PARK, SCOTIA, NY 12302
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311412
- Employees
- 40
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C01
- Issued
- Mar 5, 2024
- Abate by
- Mar 15, 2024
- Penalty
- Initial $4,839 · Current $2,903 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Press machine, Line A - On or about November 05, 2023, An employee was cleaning a Demaco Extruder press machine, powered by an electrical energy source. The employee engaged the emergency stop button to clean the machine, reached into the press as the screw was still in motion and his finger was caught in the screw. The employer did not have an established program consisting of energy control procedures, employee training, and periodic inspections.
Recent events (2)
- — I (S) $2903.4
- — Z (S) $4839
1910.147 C04 I
- Issued
- Mar 5, 2024
- Abate by
- Mar 15, 2024
- Penalty
- Initial $4,839 · Current $2,903 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Press machine, Line A - On or about November 05, 2023, An employee were cleaning a Demaco Extruder press machine, powered by an electrical energy source. The employee engaged the emergency stop button to clean the machine, reached into the press as the screw was still in motion and his finger became caught in the screw. The employer did not have procedures developed, documented and utilized when cleaning the Demaco Extruder press machine.
Recent events (2)
- — I (S) $2903.4
- — Z (S) $4839
1910.147 C05 I
- Issued
- Mar 5, 2024
- Abate by
- Mar 15, 2024
- Penalty
- Initial $11,292 · Current $6,775 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: (a) Press machine, Line A - On or about November 05, 2023, an employee was cleaning a Demaco Extruder press machine, powered by an electrical energy source. The employee engaged the emergency stop button to clean the machine, reached into the press as the screw was still in motion and his finger became caught in the screw. The employer failed to ensure that locks were provided to the employee while performing servicing work on the Demaco Extruder press machine.
Recent events (2)
- — I (S) $6775.2
- — Z (S) $11292
1910.147 C07 I A
- Issued
- Mar 5, 2024
- Abate by
- Mar 15, 2024
- Penalty
- Initial $11,292 · Current $6,775 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation: (a) Press machine, Line A - On or about November 05, 2023, an employee was cleaning a Demaco Extruder press machine, powered by an electrical energy source. The employee engaged the emergency stop button to clean the machine, reached into the press as the screw was still in motion and his finger became caught in the winding screw. The employee conducts regular cleaning of the machine without the knowledge and skills needed for the safe application, usage, and removal of energy control on equipment.
Recent events (2)
- — I (S) $6775.2
- — Z (S) $11292
More inspections at Codino'S Foods, INC.
View Codino'S Foods, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311412)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347086167.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.