OSHA Inspection: STANDING SEAM ROOFING, LLC.

Issued

Mar 7, 2024

Abate by

Apr 2, 2024

Penalty

Initial $4,839 · Current $3,345 Reduced

General-duty citation text

OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to caught-in between and crush-by hazards from a industrial bending/folding machine with a defective emergency-stop control:  a. At the fabrication shop in 76 Otter Slide Road, Eastpoint, Florida, on or about October 30, 2023, the employer failed to inspect and ensure the emergency-stop control for the Schechtl Max 310/CNC bending machine functioned as designed, exposing employees to caught-in between and crush-by hazards.

Issued

Mar 7, 2024

Abate by

Apr 2, 2024

Penalty

Initial $3,457 · Current $2,385 Reduced

General-duty citation text

29 CFR  1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  a.  At the fabrication shop in 76 Otter Slide Road, Eastpoint, Florida, on or about October 30, 2023, the employer exposed employees to amputation hazards, in that the company had not developed a lockout tagout program with specific energy control procedures for the control of hazardous energy for the Schechtl Max 310/CNC bending machine and the Schechtl SMT 310/BV shear, among other machinery with potential to release stored hazardous energy, nor performed employee training on the control of hazardous energy.

Issued

Mar 7, 2024

Abate by

Apr 2, 2024

Penalty

Initial $3,457 · Current $2,385 Reduced

General-duty citation text

29 CFR  1910.147(f)(2)(i): When outside servicing personnel were engaged in activities in a facility, the onsite employer and the outside employer did not inform each other of their respective lockout or tagout procedures:  a.  At the fabrication shop in 76 Otter Slide Road, Eastpoint, Florida, on or about October 30, 2023, the onsite employer, Standing Seam Roofing LLC, did not ensure their personnel coordinated with the outside employer, Carlisle Architectural Metals LLC, for energy control procedures, exposing employees to caught-in between and crushing hazards.

Issued

Mar 7, 2024

Penalty

Initial $3,457 · Current $2,385 Reduced

General-duty citation text

29 CFR  1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye:  a.  At 76 Otter Slide Road, Eastpoint, FL, on or about October 30, 2023, the employer failed to report a work-related in-patient hospitalization of an employee within twenty-four (24) hours. The employer reported the work-related hospitalization to OSHA on November 6, 3023.