BOCA RATON, FL —
OSHA Inspection: INTEGRAL WOOD CUSTOM CABINETRY LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of INTEGRAL WOOD CUSTOM CABINETRY LLC in 4726 NW 2ND AVE, BOCA RATON, FL 33431 (NAICS 337110). OSHA activity number 347101388.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INTEGRAL WOOD CUSTOM CABINETRY LLC
- Site address
- 4726 NW 2ND AVE
- City
- BOCA RATON
- State
- FL
- ZIP
- 33431
- Mailing
- 176 GLADES ROAD, BOCA RATON, FL 33432
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 15
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.213 C02
- Issued
- May 13, 2024
- Abate by
- May 23, 2024
- Penalty
- Initial $2,765 · Current $1,383 Reduced
General-duty citation text
29 CFR 1910.213(c)(2):Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: Note: The spreader in connection with groving, dodoing or rabbeting is not required. On or about 11/14/2023, at the jobsite located at 4726 NW 2nd Ave, BOCA RATON, FL 33431, an employee was exposed to a struck by hazard when using a table saw (model: Altendorf F45 Evo Drive, Serial #18-09-12-084) to miter cut (45.2 degrees) a Medium Density Fiberboard (MDF) without the use of a spreader.
Recent events (2)
- — I (S) $1382.5
- — Z (S) $2765
1910.213 C03
- Issued
- May 13, 2024
- Abate by
- May 23, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3):Hand-fed ripsaw(s) did not have non kickback fingers or dogs designed to provide adequate holding power for all thicknesses of materials being cut: On or about 11/14/2023, at the jobsite located at 4726 NW 2nd Ave, BOCA RATON, FL 33431, an employee was exposed to a struck by hazard when using a table saw (model: Altendorf F45 Evo Drive, Serial #18-09-12-084) to miter cut (45.2 degrees) a Medium Density Fiberboard (MDF) that was lacking an anti-kickback device.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 L02
- Issued
- May 13, 2024
- Penalty
- Initial $2,765 · Current $1,383 Reduced
General-duty citation text
29 CFR 1910.213(l)(2):Boring bits where not provided with guards that would enclose all portions of the bit and chuck above the material being worked. On or about 11/14/2023, at the jobsite located at 4726 NW 2nd Ave, BOCA RATON, FL 33431, an employee was exposed to a struck by hazard while operating a hinge boring machine that lacked a guard.
Recent events (2)
- — I (S) $1382.5
- — Z (S) $2765
More inspections in this industry (NAICS 337110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347101388.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.