Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CVP INSTALLATIONS LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CVP INSTALLATIONS LLC in 302 SUMMIT CIRCLE, LOMBARD, IL 60148 (NAICS 238170). OSHA activity number 347111882.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch CVP Installations LLC — free Get an email when a new federal OSHA severe-injury report for CVP Installations LLC is published. One employer, no account, unsubscribe in one click.
Site address
302 SUMMIT CIRCLE
City
LOMBARD
State
IL
ZIP
60148
Mailing
847 S. RANDALL RD. UNIT 208, ELGIN, IL 60123
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238170
Employees
10
Ownership type
A

6 citations on file for this inspection.

1903.19 C01

Deleted Other-than-serious 1 instance 2 exposed
Issued
Mar 28, 2024
Abate by
May 16, 2024
Penalty
Initial $388 · Current $0 Reduced
29 CFR 1903.19(c)(1):  The employer failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:  CVP Installations LLC. failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:  Citation Number 		Item Number			Abatement Date  01			                         03a				                02/21/2024  01			                         03b				                02/21/2024  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
  • — F (O) $0
  • — C (O) $388
  • — Z (O) $388

1903.19 D01

Deleted Other-than-serious 2 instances 4 exposed
Issued
Mar 28, 2024
Abate by
May 16, 2024
Penalty
Initial $0 · Current $0
29 CFR  1903.19(d)(1):The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  CVP Installations LLC. failed to submit documents to OSHA within 10 calendar days after the abatement date verifying  that each of the following cited violations had been corrected:  Citation Number                      Item  Number                 Abatement Date 01                                                    02                                       02/21/2024   Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

1926.1153 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 12, 2024
Penalty
Initial $3,349 · Current $1,675 Reduced
29 CFR  1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section:               (a) 302 Summit Circle, Lombard, IL 60148 - On or about November 17th, 2023 an employee was exposed to the hazards of respirable crystalline silica. The employee performed cutting of fiber-cement board using a handheld circular without a commercially available dust collection system.  This item was corrected during inspection.
Recent events (3)
  • — F (S) $1675
  • — C (S) $3349
  • — Z (S) $3349

1926.1153 I01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jan 12, 2024
Abate by
Feb 21, 2024
Penalty
Initial $3,349 · Current $0 Reduced
29 CFR  1926.1153(i)(1):The employer did not ensure that each employee is trained in accordance with the provisions of HCS and paragraph (i)(2) of this section:  (a) 302 Summit Circle, Lombard, IL 60148 - On or about November 17th, 2023 an employee was exposed to the hazards of respirable crystalline silica. The employee cut fiber-cement board with a handheld circular saw prior to receiving information and training on the health hazards associated with exposure to respirable crystalline silica.  Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c).
Recent events (3)
  • — F (S) $0
  • — C (S) $3349
  • — Z (S) $3349

1926.1153 G01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jan 12, 2024
Abate by
Feb 21, 2024
Penalty
Initial $3,349 · Current $0 Reduced
29 CFR  1926.1153(g)(1):The employer did not establish and implement a written exposure control plan:  (a) 302 Summit Circle, Lombard, IL 60148 - On or about November 17th, 2023 an employee was exposed to the hazards of respirable crystalline silica. The employee cut fiber-cement board with a handheld circular saw.  The employer did not establish and implement a written exposure control plan.   Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
  • — F (S) $0
  • — C (S) $3349
  • — Z (S) $3349

1910.1200 E01

Other-than-serious Gravity 5 1 instance 1 exposed
Issued
Jan 12, 2024
Abate by
Sep 25, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(e)(1):Employer had not developed or implemented a written hazard communication program which at included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   (a) 302 Summit Circle, Lombard, IL 60148 - On or about November 17th, 2023 an employee was exposed to the hazards of respirable crystalline silica. The employee cut fiber-cement board with a handheld circular saw.  The employer did not develop and implement a written hazard communication program.   Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (3)
  • — F (O) $0
  • — C (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347111882.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.