ALBANY, NH —
OSHA Inspection: SALES CONSTRUCTION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SALES CONSTRUCTION, INC. in 2219 NH ROUTE 16, ALBANY, NH 03818 (NAICS 238170). OSHA activity number 347117251.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SALES CONSTRUCTION, INC.
- Site address
- 2219 NH ROUTE 16
- City
- ALBANY
- State
- NH
- ZIP
- 03818
- Mailing
- 118 ROBIN HILL ROAD, CHELMSFORD, MA 01824
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.451 C02 IV
- Issued
- Jan 25, 2024
- Penalty
- Initial $4,610 · Current $2,305 Reduced
General-duty citation text
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms without being specifically designed by the manufacturer for such use: Location: 2219 NH Route 16, Albany, NH On or about November 20, 2023, an Ingersol Rand VR-642 Telescopic Forklift was used to support an unlabeled wood and metal work platform without being designed by the manufacture for use.
Recent events (2)
- — I (S) $2305
- — Z (S) $4610
1926.451 G01
- Issued
- Jan 25, 2024
- Penalty
- Initial $4,610 · Current $2,305 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: Location: 2219 NH Route 16, Albany, NH On or about November 20, 2023, employees installing siding from an Ingersol Rand VR-642 Telescopic Forklift mounted work platform were not protected from a fall of approximately 12 feet where fall protection was not utilized.
Recent events (2)
- — I (S) $2305
- — Z (S) $4610
1926.501 B01
- Issued
- Jan 25, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. Location: 2219 NH Route 16, Albany, NH On or about November 20, 2023, employees installing siding from a roof were not protected from a fall of approximately 12 feet where fall protection was not utilized.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B05 I
- Issued
- Jan 25, 2024
- Penalty
- Initial $3,687 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladders were not used at an angle such than the horizontal distance from the top support to the foot of the ladder way approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support). Location: 2219 NH Route 16, Albany, NH On or about November 20, 2023, employees were exposed to fall hazard when the ladder used to access the telescopic forklift supported work platform was placed at a shallow angle of approximately 45 degrees.
Recent events (2)
- — I (S) $0
- — Z (S) $3687
1926.602 D
- Issued
- Jan 25, 2024
- Abate by
- Mar 15, 2024
- Penalty
- Initial $4,610 · Current $2,305 Reduced
General-duty citation text
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178: Location: 2219 NH Route 16, Albany, NH On or about November 20, 2023, the employee operating the Ingersol Rand VR-642 Telescopic Forklift was not trained and evaluated prior to operating the forklift.
Recent events (2)
- — I (S) $2305
- — Z (S) $4610
More inspections at Sales Construction, INC.
View Sales Construction, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347117251.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.